Protable Treasure Metal Detector Falcon - Falcon

Main Feature:

1. High-brightness LED panel can generally displays the detected metal type according to the signal strength.

2. the all-metal detection mode is suitable for searching metal objects on the ground, and can be a simple recognition of metals

3. In addition to LED panel display, it can distinguish metal type by tones

4. 9.5-inch disk waterproof probe that can detect in the shallow water.

5. equipped with an external headphone jack ,connected to a single-channel headphones (headset-owned), easy to use; built-in high-capacity rechargeable battery, a low-voltage t function, with charger, Worked continuously for more than ten hours whenfull of power .

Function of Host Box

1.Detection signal indicative Zone

2. Ground Balance knob: All-metal mode button, P area is balanced block, in this area, the user can find a balance point

3.Tune knob: All-metal mode button, make the switch can be appropriated for all-metal mode (GND BAL), hold down the reset switch, when you rotate the knob to some point of the P block, the sound will be heard from the speakers, called the zero point of the voice community.

4.SENSITIVITY button: adjust the sensitivity of high or low, clockwise rotation can increase sensitivity, anti-clockwise rotation can reduce the sensitivity. This button applies to all-metal mode and identify mode.

5. DISC knob: Users can adjust this knob to exclude specific metal interference, that is, to detect the metal excluded there will not be sound alarm(namely distinguish Metal Type by tone) 6.Threshold knob: This knob is only used to identify the recognition model, counter-clockwise rotation can reduce the interference, clockwise rotation can improve recognition sensitivity.

7. Volume knob: This knob has two functions, first is the power of the switching function, Also has the function of adjustment volume size in the recognition mode. clockwise rotation can increase volume, counterclockwise rotation can lower the volume, this knob does not apply to all-metal mode .

8. Low-voltage indicator (LOW BATT): when battery voltage is below 10V, the low-voltage indicator will be lit ,and users should recharge the battery in time

9. Reset Switch:when you should adjust Zero-point , make signal reset or remove interference Please Click here to reset.

10. Operating mode switch: GND BAL is the all-metal mode, DISC is metal recognition model

11. Headphone jack . Can be inserted 3.5 mm mono headset, then the built-in speaker will be disconnected at this time.

12.Charging interface: used for a built-in battery

13 Signal Interface: Connect the five core air head of the detection disk.