This series can simulate various temperature and humidity environment for testing of electronic, automotive, rubber, plastics.
Port: SHANGHAI
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 20 Unit/Units per Month
Payment Terms: T/T
Contact Supplier
Packaging Detail: wooden packaging
Delivery Detail: 30 work days after confirmed order
Chamber Structure
The inner bladder of the chamber is made of SUS304 stainless steel plate while the outer bladder is made of salinization plate (SECC), also applied in the paint, to enhance the appearance of texture and cleanliness.
A large observation window is set on the chamber door.
A test hole with 50mm or 100mm diameter and the set position is depend on customer's requirement.
A fixable PU moving wheel is adopted on the bottom of the test chamber.
Controller
The temperature controller adopts fully imported (Japanese Unique)
P.I.D automation calculation function is available.
Cooling and Air Path Circulation System
The cooler adopts original French Tecumseh fully-closed compressor.
The cooling system adopts single or dual low-temperature loop system design.
Standards Applied
GB/T2423.1-2001 and GB/T2423.2-2001
Specs and Technical Parameters
| Model(cm) | SCT-1P-A(B,C,D,E) | SCT-2P-A(B,C,D,E) | SCT-3P-A(B,C,D,E) | SCT-4P-A(B,C,D,E) |
| Workroom Dimensions | 45*60*45 | 50*75*60 | 80*80*80 | 100*100*100 |
| Exterior Dimensions | 110*145*80 | 113*160*95 | 143*165*115 | 163*185*135 |
| Temperature Range | A:0°C-~150°C,B:20°C~150°C, C:-40°C~150°C, D:-60°C~150°C, E:-70°C~150°C | |||
| Fluctuation/Evenness | ≤±0.5°C/≤±2°C | |||
| Temperature Rise Speed | 3.0°C/min | |||
| Temperature Fall Speed | 1.0°C/min | |||
Model No.: DRK113-2
Features: Edge Crush sample cutter for the test Edge Crush Test (ECT), Sample size: 25mm*100mm(ECT) 25mm*80mm (adhesive)
Model No.: DRK107B
Features: 1. paper, board thickness test
2. ISO534, ISO438
3. digital display
4. DRK203 plastic film thickness tester
Model No.: RS-8104
Features: Pull tester is special for contact strength between plug pin and conductor, abrupt pull endurance of lead
Model No.: DRK123
Features: Box Compression Test machine used to test the compressive strength and stacking strength of corrugated boxes.
Model No.: DRK123
Features: Box Compression Tester used to test the compressive strength and stacking strength of corrugated boxes.
Model No.: DRK123
Features: Box Compression Tester used to test the compressive strength and stacking strength of corrugated boxes.
Model No.: DRK123
Features: Box Compression Tester used to test the compressive strength and stacking strength of corrugated boxes.
Model No.: DRK123
Features: Box Compression Tester used to test the compressive strength and stacking strength of corrugated boxes.
Model No.: DRK123
Features: Box Compression Tester used to test the compressive strength and stacking strength of corrugated boxes.
Model No.: DRK128
Features: ink rub meter ink abrasion tester test the abrasion of print ink, PS photosensitive coating and other relative coating.
Model No.: DRK123
Features: Compression Endurance Test and Stacking Strength Meter used to test the compressive strength and stacking strength of boxes
Model No.: DRK134B
Features: observe and evaluate the bottle cap or closed container seal craft and sealing property, Adopts PLC control; LCD display