Adopted Schnelder electron component
Imported touch screen meter from Japan
Good quality and low cost
For thermal shock test
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 20 Set/Sets per Month
Payment Terms: L/C,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: Fumigated strong wooden case
Delivery Detail: 20 days after order is confirmed
Lenpure Thermal Shock Test Chamber
Dimension Comparison
Volume (Unit: L) | Dimension of Working Room(D*W*H)mm | Overall Dimension (D*W*H)mm |
101 | 450×450×500 | 1560×870×1595 |
216 | 600×600×600 | 1710×1020×1845 |
512 | 800×800×800 | 1910×1220×2265 |
1000 | 1000×1000×1000 | 2110×1420×2665 |
chamber structure
Materials
Material of outer case: The housing is processed and formed with high-quality (t=1.2mm) A3 color plates through CNC machine with surface sprayed with plastics, looking smoother and more artistic;
Material of inner case: Imported high-grade stainless steel (SUS304);
Insulation material: High-density glass fiber cotton with thickness of 100mm;
Insulation material of door:Glass fiber cotton
Observation window
(Effective view)
Observation window introduces multi-layer insulated tempered glass and has glue flake conducting film on the inner side for defrosting (so as to observe the whole test course at any time).
Standard configuration of test chamber
Testing hole allocated at the left side of the machine (ø50mm) is used to connect testing power cord or signal wire to the outside.(Hole diameter and quantity shall be specified before placing orders)
Distance between electric wire hole and floor: 210mm (corresponding volume: 101L, 225L)
Distance between drainage hole and floor: 190 mm (corresponding volume: 500L, 800L, 1000L)
Attached with condensate receiving tray to drain water to the outside of the chamber.
Control System
Safety Protection Equipment