Programmable HART temperature head transmitter moduleMS182 - MS182

Performance

• Universal settings with HART® -protocol
• Operation, visualisation and maintenance via PC
• 2 wire technology, 4 to 20 mA analog output
• High accuracy in total ambient temperature range
• Fault signal on sensor break or short circuit
• Ex-Certification
• Galvanic isolation
• Max/Min process value indicator function
• Online configuration during measurement using configuration kit
• Wide measurement range, according to requirement

Technical characteristics

Programmable........Use PC or the hand operator.....

Measuring range.........Set via PC or by the hand operator

Input type ...................RTD, TC, R or Millivolt signal

Convert accuracy.........≤0.1%FS

Cold junction accuracy ......±1°C(TC)

Output...................4~20mA/20~4mA Electrical isolation output

HART –Protocol output

Max-load...............(V -13V)/0.025A(Current output )

Limit current.............≤25mA

Response time............1s

Isolated voltage...........1500V AC (input/output)

Alarm signal.................Programmable

Underranging linear drop to 3.8 mA

Overranging linear rise to 20.5 mA

Sensor break or short-circuit:≤3.6mA or ≥21.0mA

Power supply...............13~30V DC

Temperature drift...........0.01% FS/1°C

Long-term stability..........≤0.1°C per year or 0.05 %per year

Ambient..........-40~+85°C

Field of application

Temperature head transmitter with HART® -protocol for converting various input signals into a standard 4 to 20 mA analog output signal

Input:RTD,TC,Ohm,mV

HART® -protocol for front end unit or panel unit operation using the hand operating module(MS275, MS375,PDAN800,PDA S900) or PC

Electrical connection