1.Executive test in 40A/60A of UL60950-1
2.Test resistance range 0~510m ohm
3.Output current range (5.0~30.0)A
Port: Shanghai
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 200 Unit/Units per Month
Payment Terms: T/T,Western Union
Contact Supplier
Packaging Detail: carton or box
Delivery Detail: Ready stock
Goal: check that all the touch accessible parts are properly connected to the protective earth connection.
Executive test in 40A/60A of UL60950-1
The tester will first check whether the input power supply right connected to N, L,G automatically after power on and give the prompt information if any of misconnection Constant current output with the stability of 1% prevents inaccurate test results induced by output supply voltage
Waveform distortion is less than 1% with linear power amplifier.
The tester satisfies the safety regulation criterion, which require the crest factor must be within the range between 1.3 and 1.5
Key lock, preventing operators from modifying test parameters
Adopt 240*64 graphic dot matrix LCD ,displaying setting parameters and testing parameters strikingly, visually
LCD contrast, buzzer volume, the retention time of PASS signal can be adjusted by keystrokes.
50 memory groups, 30 steps per group
Rectification circuit adopts RMS-DC converter, truly reflecting testers output current value
Standard PLC interface, optional ports: RS232C, RS485, GPIB, USB
Through PLC interface control eight memory groups. Level signal or contact signal can be selected as PLC test signal and if level signal selected, PLC high output level is 24V during the testing
Calibration and prompt function. After 12 months use, tester can automatically give prompt information
n Test results which maximum can be up to 9999 will be stored into the tester or sent to PC through RS232 interface
| Model | CS9950 | CS9950A |
| Current range | 3.00A~30A | 3.00A~25A |
| resolution | 0.01A | 0.01A |
| accuracy | ±(1%+0.2A) | ±(1%+0.2A) |
| Dimension | width×height×length= 285mm×355mm×480mm | |
| Weight | 10kg(net weight) 11.8kg(shipping weight) | |
Model No.: HT-TC
Features: Cable fault tester
1.to test the HV arcing fault of cable, earthing high,low resistance,short circuit and breakage of the cable
Model No.: VMS-1510T
Features: Coodinate Testers Machine
1.SONY or TEO camera
2.Accuracy:0.003mm
3.Probe:British Renishaw
4.Resolution:0.0005mm
Model No.: T2115
Features: 1.A type of Handheld Digital television signal Power meter:
2.Display LCD:128*64
3.DC supply:DC 7.5v/1.6A
4.Meet ISO
Model No.: TV200/220/260
Features: portable vibration meter
1.Compact size, small weight, easy handling
2.Prompt testing of vibration
3.quick checking
Model No.:
Features: Advanced Ion tester
Made in Japan
have 5 measurement modes
Measurement range: 0~100,000 ions/CC
Model No.: VMS-4030T
Features: Test Equipment
1.SONY or TEO camera
2.Travel:400X300X150mm
3.Probe:British Renishaw
4.Resolution:0.0005mm
Model No.: 3308
Features: 1.1/12" VGA CMOS sensor
2.Signal system:NTSC/ PAL
3.Dia Fouce:2cm-7cm
4.Size:D5.5mmxL25.5mm
5.Glass 2 plastic+IR cut+Covert
Model No.: SELON950
Features: 1.selon950 are used to measure conductivity,
2.TDS (Total Dissolved Solid), salinity and temperature of solution
Model No.: BMP18
Features: Absorbing Germany Schenk technology, is installed under the belt conveyor to make continuous weighing for conveying material.
Model No.: ZSDPM
Features: 1).Digital Panel Meters available are 3.5, 4.5, 5.5 digit.
2).All Meters available in size 96 x 96 mm.
Model No.: SE828
Features: 1.A type of Handheld Digital television signal Power meter:
2.Display LCD:128*64
3.DC supply:DC 7.5v/1.6A
4.Meet ISO
Model No.:
Features: Mineral negative ion machine
Made in Japan
have 5 measurement modes
Measurement range: 0~100,000 ions/CC