Full stainless steel construction, 316L diaphragm, good media compatibility; Protection IP65;
Port: Shanghai / Ningbo
Minimum Order Quantity: 100 Piece/Pieces
Supply Ability: 10,000 Piece/Pieces per Week
Payment Terms: T/T,Western Union
Contact SupplierPackaging Detail: Standard Export Caton
Delivery Detail: 7 work days
Control range: -0.1…0~0.01…10MPa
Accuracy: ±1%FS(hys.+rep.)
Switch hysteresis: ≤±1%FS
Power supply: (12~24)VDC
Load current: (4~40)mA
Leak currect(cut current): ≤4mADC
Inner voltage reduced: ≤8VDC
Repeatability: ≤±0.5%FS
Temp. effort: ≤±3%FS
Operation temp.: -10°C~80°C
Operation Mode
MPM582 has two operation modes as below:
NPN: when measure pressure ≥ setting pressure value
Output current = load current
PNP: when measure pressure ≤ setting pressure value
Output current = load current
At other pressure, output current = leak current
Please connect with load in the operation, the load should be 200Ω~3kΩ, comsumption≥1/2W. When the user connect with sensing load, please connect parallely suitable capacitance.
The product could provide the electric signal which is relative with pressure control relay with 2-wire current loop, it can drive relay or provide switch signal for following electric circuit. The product can be used for flow pressure control of petroleum, chemi-industry, metallurgy, traffic and power station, etc.