Pressure Compensation Device
1.Adjustable and pre-set relative humidity
2.Optical operating display (LED)
Port: NINGBO
Minimum Order Quantity: 100 Piece/Pieces
Supply Ability: 1000 Piece/Pieces per Week
Payment Terms: L/C,T/T,Western Union
Contact Supplier
Pressure Compensation Device, temperature thermostat , pressure testing device, measurement device
It has becomemore andmore important to provide a protected enclosure environment for valuable and crucial electrical and electronic components. In a tightly closed enclosure, pressure differentials can occur during extreme temperature variations, such as day/night operation.When this occurs, the risk of dust and humidity being absorbed into the control panel increases dramatically. The specially designed pressure compensation device DA 084 permits a controlled change in pressure. It can be installed easily in any enclosure. The pressure compensation device is suitable for the use in enclosures and switch cabinets in accordance with DIN EN 62208.
Technical Data
Mounting | PG 29 thread with union nut |
Torque | 5Nm (max. 10Nm) |
Material | plastic according to UL94 V-0, pebble grey |
Sealing | sealing gasket NBR |
Air interface | approx. 7cm² |
Dimensions | Ø 65.5mm x 30.5mm |
Fitting position | vertical* |
Operating/Storage temperature | -45 to +70°C (-49 to +158°F) |
Protection type is restricted to IP54 if fitting position of DA 084 is not vertical.
Installation Make cut-out Ø 37+1mm in enclosure wall and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure.