Portable 5-parameters Water Quality Detector - WMP-5

I. General Introduction

v Perfect combination of advanced electron technology, sensor technology and software design.

v Can test pH, ORP, conductivity, TDS, salinity, resistivity, DO and temperature in water solution, with high accuracy and best cost performance

v Used in industrial& mine enterprises, generating station, water-treatment project, environmental protection, etc., especially used in the field

II. Characters

v 1. Multi-parameter meter, with 4 electrodes, that is, pH electrode, ORP electrode, conductivity electrode and DO electrode. After the electrode is inserted, it will be recognized automatically.

v 2. built-in microprocessor, with multiply function as automatic calibration, automatic temperature compensation, data back-up, function setup, information self-diagnosis, auto-shutoff, low-voltage display, etc.

v 3. Apply digital filtering and slip technology, improving its response speed and test accuracy intellectually. When the test data is stable, the signal is displayed.

v 4. auto-identify 13 kinds of pH standard buffer solution

v 5. pH testing models for pure water or ammoniated pure water are optional. To these two kinds of special pH testing models, both normal slope compensation and non-linearity temperature compensation to solution pH value are available, increasing its accuracy. It is suitable to be used in generating factory, petroleum chemistry, etc.

v 6. single-point calibration: adopting advanced Automatic Frequency Conversion and Automatic Voltage-Adjusting technology, the measuring range of electrode (content K=1) extends to 10 times. Only a single-point calibration can satisfies the measurement request for 0-100 mS/cm, which is the special single-point calibration function of our product.

v 7. Identify 8 kinds of conductivity standard solution automatically. Two serials can be available: the serial used by Euro and USA and the serial used by China.

v 8. Choose measuring range of conductivity automatically. To the pure water and super pure water, whose conductivity ratio is less than 10μS/cm, it can make non-linearity temperature compensation automatically, increasing its accuracy. It is suitable to be used in generating factory, micro-electronics industry, medical industry, etc.

v 9. DO electrode with temperature and salinity sensor: automatic temperature compensation, automatic salinity compensation and manual pressure compensation function.

v 10. Polar graphic DO electrode, with exclusive DO electrode calibration cap, only 3-5min to get polarized. Combined diaphragm cap for easy use. Each DO electrode is equipped of 3 spare diaphragm caps.

v 11. Use Surfaced Mounting Technology on circuit board, improving its reliability.

v 12. LCD display, with blue backlight

v 13. IP57 dust-proof and waterproof