IEC68-2-31(2008),IEC68-2-32,IEC884,IEC320-1,IEC60238,EN50075
Port: shenzhen
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 50 Set/Sets per Month 8 H/D
Payment Terms: L/C,T/T,Western Union,Cash
Contact SupplierPackaging Detail: wooden case
Delivery Detail: 15 days after payment normally, special for the request
Tumbling Barrel Tester:
Application
The Tumbling Barrel Test simulates repeated falls which may occur to such devices as connectors or small remote control units which are normally attached to cables during use.
The Tumbling Barrel Tester is the recommended instrument to perform such a test. A barrel is turned at a rate of five revolutions per minute resulting in ten falls per minute. The sample falls from a height of 500mm on to a steel plate that is 3mm thick and backed by 19mm thick hardwood. The number of falls is set by the user in accordance to the standard they are meeting. After the tumble barrel procedure, the specimen is checked visually, mechanically, and electrically as prescribed in the relevant specification.
Specification:
Tumbling | 5r.p.m (drop 10 times/min) |
Motor | 90W |
Counter | Electrical type, 6 letters, stop at the rated time |
Weight | 85kg |
Power | AC220V 2A |
dimension (WxDxH) | 70*70*83mm |