DXN-C IS designed for compare two phases and/or detection of primay voltage via capacitive voltage dividing system
Port: Xiamen
Minimum Order Quantity: 50 Piece/Pieces
Supply Ability: 100000 Piece/Pieces per Year
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: packed in carton
Delivery Detail: within a week
We Xiamen Leelen High Voltage Electric Co.,Ltd,is a professional OEM/ODM manufacturer about switchgear conponents,such as voltage indicator,heater,short circuit and earth fault indicator,blocking magnet,Led light,voltage sensor,temperature and humidity controller,etc
High Voltage Indicator used in Safe-Ring Switchgear
Gerneral Information
The high voltage indicator which the display method is brightness
using together with sensor can indicate the electriferous state of the
voltage circuitry .
DXN9-C use together with the indicator which the hole distance
of the power-check terminal is 14mm or 19mm, which can indicate the
electriferous state .
Phase comparator DXN-C use together with the high voltage indicator
can indicate the electriferous state of the connection circuitry and check
the phase sequence of the electric device .
Power-check: phase comparator insert into the earthing or the other
terminals of the high voltage device .
Phase-check: phase comparator insert into the same phase power-check
terminal of the two high voltage device , if the Led is brightness, it shows that
the testing phase have power supply.
Technic Parameter
Rating Frequency: 50HZ
Threshold voltage and current : 15%-40% Un, 2.5uA
Ambient Temperature : -25-+55°CDXN6-T
Protection Class: IP54
Type | Outline Dimension | Cutting hole size | Installation hole |
DXN6-T | 70×35×33 | 55×32 | Φ3.4×2 Distance64 |
DXN2-T | 130×30×45 | 110×26 | Φ5.2×2 Distance64 |
DXN2-Q | 96×48×88 | 91×44 | |
DXN7-T | 100×35×33 | 84×32 | Φ3.4×2 Distance64 |
Remark: If need the locking function, it should add locking indicator DXN2-Q and the locking magnet.