1.PVC film lamination film plane plot
2.high quality
3.operation convenience
4.lowest price
5.maintain 3 years
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 300 Unit/Units per Month
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact Supplier
Packaging Detail: By standard export wooden box.
Delivery Detail: Within 20days when get 30% downpayment.
PVC film lamination film plane plot
Equipment discription:
The machine used to test plastic materials, PVC and other materials containing impurities, so as to determine its quality. The test material placed in the mold, through heat and pressure, the raw material shape. Will observe the drawer cast specimens placed on the glass surface fog, the light through from bottom to top, can clearly see the impurities in the specimen to determine the compound containing the impurity.
Technical parameter:
| Model | HZ-1713 PVC film lamination film plane plot |
| Capacity | 10T/20T/30T/50T |
| Temperature range | Room temperature~300 Degree centigrade |
| Temperature controller | LED display, set the input keys, numerical display (Taiwan original) |
| Timer | LED display, time range 0.1S ~ 99min ~ 9.9hr |
| Temperature control mode | P.I.D mode control |
| Heater | Heated mold |
| Heating time | Room temperature ~170 degree cemtigrade it will take 15min |
| Thermal pressure plate | 300*300mm(Taiwan original) |
| Cold pressure plate | 300*300mm |
| Refrigeration system | All single-stage compressor sealed (Import) |
| Cold media | Environmental friendly refrigerant |
| Cooling | Chilled water circulation system |
| Cooling temperature range | Room temperature~-5 Degree centigrade |
| Hydraulic system | Closed loop proportional hydraulic flow control system, GPY oil pump drive with high-precision high-performance electro-hydraulic cylinder, the piston without resistance rate control mode execution, |
| Cylinder stroke | Max 200mm |
| Cylinder speed | 11mm/s |
| Pressure table | 0~200kg/sq.cm |
| Dimension | (W*D*H) 1000*500*1500 mm |
| Power | AC380V,20A |
| Weight | About 660kg |
Model No.: CDW-100T
Features: CDW-100 Cooling Unit for Impact Test
refrigeration instrument for impact test
to cool the impact specimen
Model No.: SDS-IVa
Features: Total Sulfur analyzer
1.Fast test speed:3-6min/sample
2.Low cost and high performance
Model No.: XW
Features: Tensile Testing Machine: for the tensile test of plastic film, sheet, pipe, waterproofing membrane, rubber, etc.
Model No.: XW
Features: Tensile test machine
Tensile and compression test
Double-screw
LCD display
Peak value kept
Model No.: WDW
Features: universal Testing Machine
1.for tension,compression,bending peeling etc
2.ISO 9001:2008standard
3.Test Force Range:2%~100%
Model No.: XJM-3
Features: XMJ-3 Film Impact Tester
to measure impact energy to film or membrance
Model No.: DGD-SD5
Features: Cable fault locator
Good quality and easy to use
Model No.: JQ-6020
Features: Accurate Drying Chamber
1.Passed ISO 9001.2008
2.Fast delivery
3.Very competitive price
4.Accuracy result
Model No.: JQ-847B
Features: climate chamber
1.study rubber and plastic etc
2.competitive price
Model No.: HD-502S-1000
Features: Compression Machine
Up to TAPPI-T804, ASTM-D64
Box compression testing machine
Computer servo control system
Model No.: ZGF
Features: AC & DC High voltage test equipments
1.small ripple factor
2.stable and reliable voltage output
3.with 0.75 times voltage con
Model No.: GD-510G-II
Features: GD-510G-II Oil Solidifying Point Tester /Petroleum Solidifying Point Tester/Solidifying Point analyzer