PTE Thin Wall Pipe Superficial Portable Rockwell Hardness Tester - PTE rockwell hardness tester

Pipe Superficial Portable Rockwell Hardness Tester

Features

1. The thin wall pipe superficial hardness tester is a type of low-load

Rockwell hardness tester.

2. The thin wall pipe superficial Rockwell hardness tester works on the same testing principle with high accuracy as the bench type tester, in compliance with the ISO6508.2 and ASTM E110 standards.

3. Consisting of the tester and bench stand, the superficial Rockwell hardness tester can either be used on the desk or on the shop floor.

4. The low-load Rockwell hardness tester provides non-destructive examination, with slight indentation and no damage to most work pieces.

5. Equipped with the ball indenter with the diameter of 1.588mm, the thin wall pipe superficial Rockwell hardness tester is able to test the hardness value by HR15T scale. This Rockwell hardness tester is generally used for soft materials like copper tubes, brass pipes, stainless steel pipes, aluminum pipes, among others.

6. Also, the thin wall pipe superficial Rockwell hardness tester can be optionally designed with the ball indenter with diameters of 3.175mm, 6.35mm, and 12.7mm, for testing much softer materials like silver tubes, and lead pipes, etc.

7. With more economical costs and easier operation, the superficial Rockwell hardness tester can be used to replace the Vickers hardness tester.

8. Traceable standard hardness block, and qualified indenter.

9. The dynamometer, used for checking load, can be traced to the national secondary standards.

Features

Initial test force 3kg

Total test force 15kg

Indenter 1.588mm steel ball indenter

Indication error Meets the requirements of ISO6508

Repeatability error Meets the requirements of ISO6508

Resolution 0.5HR

Testing range 15 scales, such as HRN, HRT, HRW, HRX, and so on.

Application scope The thin wall pipe superficial Rockwell hardness tester can be applied to all common metal, such as steel, iron, zinc, lead, tin, carburized steel, and nitrided steel, etc.

Standard Package

Tester

Bench stand

1.588mm steel ball indenter

Superficial Rockwell hardness block

Flat anvil

V anvil extens

Carrying case

Optional Accessories

120°diamond indenter

1.588mm, 3.175mm carbide ball indenter

1.588mm, 6.35mm, 12.7mm steel ball indenter

Hardness block (HR15N, HR30N, HR45N, HR15T, HR30T,HR45T)

Raised spot anvil

Diamond raised spot anvil

Ball testing anvil

Spare magnifier