PT100 explosion-proof Temperature Transmitter MS199 - MS199

MS199 Temperature Transmitter

Detail Product Information

• Universally PC programmable (PCP)
• Advanced design makes it only 8V within its all loop circuit
• Two-wire technology, analog output 4 to 20 mA
• LED Display
• Operation, visualization and maintenance with PC
• Highly accurate in entire operating temperature range
• Sensor monitoring: Failure conditioning, corrosion detection
• Failure conditioning in event of sensor break or sensor short-circuit
• Ex-Certification
• Galvanic isolation
• Output simulation

Primary Technical Characteristics

Programmable .........................Use MS181 programming tool

Measuring range ......................Set via a PC

PC Interface .............................USB/RS232

Input type .................................RTD, TC, R or Mill volt signal

Convert accuracy..................... ≤0.1%

Output ......................................4~20mA/20~4mA Electrical isolation output

Cold junction accuracy ............±1°C (TC)

Max-load................................. (V -8V)/0.025A(current output)

Current limit............................. ≤25mA

Response time......................... 1s

Isolate voltage ..........................1500VAC (input/output)

Alarm signal ..............................Programmable

Below the measuring range Output drops to 3.8mA

Higher than the measuring range Output rises to 20. 5mA

Sensor faults Setting as≤3.6mA or ≥21.0mA

Power supply ............................8~30V DC

Temperature drift...................... 0.01%FS/1°C

Long-term stability ....................≤0.1°C per year or 0.05% per year

Protection level.......................... IP67 (Aluminum alloy) IP65(Plastic)

Digital display............................ LED,LCD

Display voltage-drop Integrated design makes it only 8V within its whole loop circuit

Display accuracy....................... 0.1%

Ambient ....................................-40~+85°C

Explosion-proof class................ Exdii CT6

Every part is coming from Moshu Group,from professional!

Field of application

PC programmable (PCP) Field-mounted temperature transmitter for converting various input signals into a standard 4 to 20 mA analog output signal

Input:

Resistance thermometer (RTD)

Thermocouple (TC)

Resistance transmitter (Ohm)

Voltage transmitter (mV)

HART-protocol for front end unit or panel unit operation using the hand operating module (MS275, MS375,PDA N800,PDA S900) or PC

Electrical Connective Diagrams

Wiring Diagram

Size(mm)

Package