PT100 Temperature Transmitter - MS199

MS199 Temperature Transmitter

Detail Product Info

· Universally PC programmable (PCP)

· Advanced design makes it only 8V within its all loop circuit

· Two-wire technology, analog output 4 to 20 mA

· LED Display

· Operation, visualization and maintenance with PC

· Highly accurate in entire operating temperature range

· Sensor monitoring: Failure conditioning, corrosion detection

· Failure conditioning in event of sensor break or sensor short-circuit

· Ex-Certification

· Galvanic isolation

· Output simulation

Display Panel

Every part comes from Moshu Group,from professional!

Primary Technical Characteristics

Programmable ............................... Use MS181 programming tool

Measuring range ............................ Set via a PC

PC Interface.......................................USB/RS232

Input type............................................RTD, TC, R or Mill volt signal

Convert accuracy .............................≤0.1%

Output ................................................4~20mA/20~4mA Electrical isolation output

Cold junction accuracy ...................±1°C (TC)

Max-load ............................................(V -8V)/0.025A(current output)

Current limit...................................... ≤25mA

Response time : 1s

Isolate voltage : 1500VAC (input/output)

Alarm signal : Programmable

Below the measuring range Output drops to 3.8mA

Higher than the measuring range Output rises to 20. 5mA

Sensor faults Setting as≤3.6mA or ≥21.0mA

Power supply.................................... 8~30V DC

Temperature drift..............................0.01%FS/1°C

Long-term stability .......................... ≤0.1°C per year or 0.05% per year

Protection level ..................................IP67 (Aluminum alloy) IP65(Plastic)

Digital display ....................................LED/LCD

Display voltage-drop : Integrated design makes it only 8V within its whole loop circuit

Display accuracy : 0.1%

Ambient............................................. -40~+85°C

Explosion-proof class..................... ExdII CT6

Field of application

·PC programmable (PCP) Field-mounted temperature transmitter for converting various input signals into a scalable 4 to 20 mA analog output signal

· Input:
-Resistance thermometer (RTD)
-Thermocouple (TC)
-Resistance transmitter (Ohm)
-Voltage transmitter (mV)

Configuration using a PC with MS181 configuration kit