PORTABLE METER - KL 5

PORTABLE CONDUCTIVITY/TDS/SALINITY /^oC METER

KL 5 series is measure conductivity, Total Dissolved Solid, Salinity and Temperature. The series have four models:

* KL 520 Conductivity/^oC Meter

* KL 530 Conductivity/TDS/^oCMeter

* KL 531 Conductivity/Salinity/^oC Meter

* KL 540 Conductivity/TDS/Salinity/^oC Meter

Microprocessor-Based:

The meter is designed in CPU. Even can work about 200 hours continuously with one 9 volt battery.

Single Point Push-Button Calibration:

The meter can calibration automatically after it matched with standard solution. In calibration, The meter with function of auto recognition. If you used standard solution by mistake, it will display tips automatically.

Auto-Ranging for Conductivity:

The meter with function of auto ranging when it measuring conductivity or TDS. After electrode immersed in solution. KL 5 series will scan the current value and convert range.

Automatic Temperature Compensation:

The meter with function of automatic calibration and measurement, it will recognize the temperature sensor automatically and measure temperature after temperature sensor connected to the host. If the conductivity electrode connected to it. The meter will measure automatically.

Power Monitor:

KL 5 series built-in power monitor and control chips, when battery's power is lower than its required, the battery icon on LCD will disappear automatically and suggest you replace batteries.

Adjustable Temperature Coefficient:

Solution contained different ions usually have different temperature coefficient, and it's importment to set the coefficient correctly for precise measurement. LIDA5 series can be set in the range of 0 and 3.9%/^oC.

Adjustable Electrode Constant:

When measure solution with higher or lower concentration, You should choose different constant of conductivity electrode, The meter with three cell constants (K=0.1/1/10) for your choose, so you can set it match with the electrode you choose. The meter can save the measured value for different constant electrode separately. After setting the constant, the meter will work properly, you need' t calibrate it again when replacing a new electrode.

Adjustable TDS Factor:

According to the analyse theory of conductivity, It need user estimate TDS factor it be set, KL 530/540 can be set in the range of 0.01 to 1.00, which can ensure accuracy of measured value.

Operational Message:

KL 5 series with function of operational message. When you need a certain setup or measurement, the message will help you what you can do and how do it. It equals to the instruction of user's manual, You can set and measure conveniently under it's guide.

Save Data:

The meter can save data 64 sets. Press [SAVE], and the meter will store current measured value automatically and serial number, date, time and other information.

Output Data:

The data stored in meter can be sent to PC through link. You can also save measured value or print out test report via software.

Spec: