Product Features:
Infrared Leak Detector with sniffer pen or 5 led sniffer probe:
- High Accuracy (0,5 g/y)
- Fast response time (less then 2 s)
Business Terms:
Contact Supplier
Infrared Leak Detector with sniffer pen or 5 led sniffer probe:
- High Accuracy (0,5 g/y)
- Fast response time (less then 2 s)
PLD1000 is the new POLO leak detector based on infrared technology.
This type of sensors are well known for the no false alarms and for the high accuracy in leak detection. Also the life of the infrared sensor are higher than the halogen one.
The basic instrument can be equipped with oneor two of the following sensor/s:
| Sensor type | Gas type | Min. detectable leak rate (g/a) | Minimum increment (g/a) |
| T1 | R134a R407c | 0.3 | 0.1 |
| T2 | R600a R290 | 0.5 | 0.1 |
| T3 | R134a, R404a, R407c, R410a, | 0.5 | 0.1 |
| T4 | R22 | 0.5 | 0.1 |
| T5 | CO2 | 1 | 0.1 |
| T6 | HFO1234YF | 0.5 | 0.1 |
The standard probe is the typical sniffer pen, but PLD1000 have as optional the multy function sniffer probe. This probe has 5 led on board to display the leak set point and an adjustable acoustic alarm inform the operator on the detect leak and two button.
The first button is dedicated to the suppression of the zero background and the second button is dedicated to the special application.
MAIN TECHNICAL DATA
| Smallest detectable leak rate | 0.5 g/a |
| Measuring scale | 0.1 – 99.9 g/a |
| Response time (with 3m cable) | ~ 2 sec |
| Leak rate units | g/a; oz/y |
| Warm up time | 45 sec |
| Detectable refrigerants | R22, R134a, R290a, R404a, R407c, R410a, R600a, CO2 |
| Sniffer tip length (mm) | 120 (opt. 320) |
| Sniffer Cord length (m) | 3 (opt 5) |
| Adjustable set point | 1 |
| Digital output | 2 (8A 250V) |
| RS232 | 1 |
| Power supply | 90-250Vac 50-60Hz |
| Box overall dimensions | 250x143x260 mm |
| Sniffer overall dimensions (mm) Pen 5 led Multy function | Ø25 x 100 102x30x54 |
| Display | Graphic 128x54 |
Model No.: GD-6536
Features: It is suitable to determine distillation characteristics of natural gasoline, vehicle gasoline, aviation gasoline, jet fuels
Model No.: GDVA-404
Features: The instrument provides fully automatic testing and calibration for all types of low leakage flux current transformer
Model No.: GDDW-III
Features: GDDW-III Earth Resistance Tester adopts microprocessor to control and process signal.
Model No.: GD-8929
Features: GD-8929 Crude Petroleum Water Content Tester is suitable to determine water content in the crude petroleum.
Model No.: GD-706
Features: GD-706 Self-ignition Point Tester
It is used to determine the lowest temperature when fire resistant oil combusts in a flask
Model No.: GD-6536
Features: It is suitable to determine distillation characteristics of natural gasoline, vehicle gasoline,fuels, diesel oil, distillate etc
Model No.: GD-8019
Features: GD-8019 Existent Gum Tester (oil tester ) is used to determine the existent gum in gasoline and aviation fuels.
Model No.: GD-6536
Features: It is suitable to determine distillation characteristics of natural gasoline, vehicle gasoline, and similar petroleum products .
Model No.: GD-17041
Features: GD-17041 UVF Sulfur Tester can be used to determine total sulfur or sulfide in other liquid or solid powder.
Model No.: GSD-1
Features: GSD-1 Electric Humidity Tester is a portable instrument used to determine water content in the lumber.
Model No.: GDSD-1
Features: GDSD-1 Electric Humidity Tester is a portable instrument used to determine water content in the lumber.
Model No.: GDSD-1
Features: GDSD-1 Electric Humidity Tester is a portable instrument used to determine water content in the lumber.