Rockwell Hardness Tester
1.thin metal sheets,tubings, thin shafts, small balls, case hardened material
2.Total test force15kg
Port: qingdao
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 100 Set/Sets per Day
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: wooden case or boxes
Delivery Detail: 7 days
PHR Series Superficial Rockwell Hardness Tester
Application
The PHR portable superficial Rockwell hardness testers are a variety of the Rockwell hardness testers. They have smaller test forces and thus smaller indentation, used to test the hardness of thin and small work piceces such as thin metal sheets, tubings, thin shafts, small balls, case hardened materials and other metal parts which require indentation as small as possible.
Test range covers low-hardness materials like aluminum, lead, tin; mid-hardness materials like aluminum alloys, copper, copper alloys, stainless steel, cold rolled sheets, tinplate; and high-hardness materials like thin and hard steel strips, carburized and nitrided steel.
The test result reads in 15 scales, N, T, W, X and Y. The accuracy meets the requirements of GB/T230, ISO6508, ASTM E18.
The test is accurate, relatively fast and simple, with small indentation non-destructive to most specimens. Thus, it is suitable for one-by-one on -site inspection of batches of finished or semi-finished work pieces. The readings can be converted into HV, HB or tensile strength through conversion tables.
Specification
Initial Test Force 3 kg
Major Test Force 15 kg, 30 kg or 45 kg
Accuracy ±1.5HRC
Precision ±0.5 HR
Accuracy conform to GB/T230,IS06508,ASTM E18
Versatility tests in the hand or on the desk; tests long, heavy specimens without cutting.
Applied to metal , including steel, stainless steel, bronze, brass, red copper, aluminum, A-alloy. Etc.
STANDARD ACCESSORIES
1 | Tester | 1 | Flat Anvil |
1 | Bench Stand | 1 | V Anvil |
1 | Diamond Penetrator (120°) | 1 | Raised Spot Anvil |
2 | φ 1/16Steel Ball Penetrators | 1-2 | Extension Adaptor(s) |
4 | Standard Blocks | 2 | Magnifier |
OPTIONAL
Steel Ball Penetrator | 1/8, 1/4, 1/2 | for testing softer materials |
Diamond Raised Spot Anvil | for testing very thin (0.05mm-0.6mm) strips | |
Narrow Tip Anvil | 1.5mm×11mm , 2.0mm×11mm , 3.0mm×11mm | for parts with very small support area such as small stamped parts |
Anvil for Balls | 1/2 | for testing balls with diameter 2.5mm - 80mm |
Precise V Anvil | for testing slim cylinders 2mm - 18mm |
Model | Opening Size (W×D) | Net Weight | Application: |
PHR-1S | 25mm×25mm | 0.7kg | thin sheet, thin wall pipe, small component and workpiece with hardened surface by carburizing, nitriding and high-frequency quenching. Thickness more 0.15mm |
PHR-2S | 50mm×50mm | 1.2kg | thin sheet, thin wall pipe, small component and workpiece with hardened surface by carburiing, nitriding and high-frequency quenching. Thickness more 0.15mm |
PHR-4-2S | 100mm×50mm | 1.5kg | workpiece with hardened surface by carburizing, nitriding and high-frequency quenching. Thickness or diameter of test piece less 100mm |
PHR-1st | Inner dia. of specimen >4.8mm | 0.8kg | Thin Pipe with inner dia more than 4.8mm, workpiece with stainless steel, copper & copper alloy, aluminum, A-alloy |