Thin Wall Pipe Superficial Rockwell Hardness Tester
1.copper,brass,Aluminum,steel,silver pipe etc
2.ISO6508
3.NDT test
Port: jinan
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 1000 Set/Sets per Year
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: bags
Delivery Detail: within 15 days by courier
PHR-1ST Thin Wall Pipe Superficial Rockwell Hardness Tester
Application:
Test the superficial hardness of thin wall pipe
Apply 15kg test force, Small indentation, no effect to the application of most work pieces, used for finished work piece NDT test directly.
Tests thin-wall slim pipes 4.8mm, thickness>0.15mm
The test principle and accuracy comply with standard ISO6508.
Capable of testing copper, brass, Aluminum, Aluminum alloys, stainless steel, silver pipe.
Test softer pipe with larger ball penetrator.
Test standard block or plate with flat adaptor installed on the anvil.
Can be used on table by put into bench stand.
Copper, copper alloys, Aluminum, Aluminum alloys, silver, silver alloys, stainless steel, etc.
Features:
Initial Test Force: 3kg
Total Test Force: 15kg
Force Applying Method: By Screw
Indenter: 1.588mm carbide ball
Accuracy: Meets the requirement of ISO 6508
Resolution: 0.5HR
Testing Range: HR15T, HR15W, HR15X, HR15Y
Standard Package
Tester
Bench stand
1.588mm carbide ball indenter
HR15T Superficial Rockwell test blocks
Flat Adaptor
Flat anvil
Carrying case
Optional Accessories
Carbide ball indenter (Dia1.588mm, 3.175mm)
Steel ball indenter (Dia6.35mm, 12.7mm)
HR15T Superficial Rockwell test blocks
Spare magnifier