co2 gas detector:
1.gas analyzer
2.can detect gases include C2H2, CH4, C4H10, C2H4, C2H6, C3H8, CO2,CO and SF6, etc
Port: Zhengzhou
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 50 Piece/Pieces per Week
Payment Terms: T/T
Contact Supplier
Packaging Detail: Customary Packing and Oringinal Packing is available
Delivery Detail: 5 days
PGas-31 Infrared Gas Detector
The measurement principle of (NDIR) "Non-dispersive Dual-wavelength Infrared Spectrum" is adopted for PGas-31 gas infrared quantitative detector. There is no radiotive emitter and it is convenient to carry; the screen of hand-held probe uses OLED, it is self-luminous with high brightness, with no visual angle problem; high precision, good stability and sensitivity, and the resolution of leakage detection can reach 0.1ppm; the response time is fast; with no consumable parts, life time of the sensor is extra long; it can detect gases include C2H2,CH4,C4H10,C2H4,C2H6, C3H8,CO2,CO and SF6, etc.
PGas-31 gas infrared quantitative detector is mainly composed of two parts: the host machine and hand-held probe.
1. Display screen of host machine
2.Host machine
3. Power switch
4.Aviation plug
5.Filter cap
6.Probe rod
7.Probe panel
8.Probe
9.Communication wire
Main features
l The probe unit adopts light-emitting display screen of organic matter, it is self-luminous with low power consumption and high brightness, and there is no problem of visual angle
l The host machine adopts 3.5 inch color touch display screen, the brightness is high, the visual angle is small and the contrast is adjustable
l The sensitivity is high, the detection of leakage can reach 0.1 ppm, and the precision can reach 1ppm at most
l Good stability
l Swift response time
l Acoustoptic alarm
l Facilitates carrying;
l It can realize manual storage of measurement data;
l Long service life of sensor
Technical parameters
| Parameter | Characteristics |
| Measurement principle | Infrared (NDIR) |
| Measurement range | Refer to lectotype table |
| Sampling mode | Pumping type |
| Service temperature | -10~60°C |
| Power supply | 7.2V DC, internal battery power supply |
| Response time (T90s) | 1~5 second(s) |
| Warm-up time | 100 seconds |
| Probe unit rod length | 22cm |
| Service life of sensor | >10 years |
| Calibration time | Calibration once every six months |
| Alarm mode | Buzzer |
Model No.:
Features: SV-5Q Automobile Exhaust Analyzer is to test HC, CO, CO2, O2, NO with excellent quality;;
Model No.: PGas-21-NO2
Features: Handheld PGAS-21 Nitrogen Dioxide NO2 Gas Alarm Meter
1.Electrochemical principle
2.Ex(ia) IICT3,
3.IP65
4.CE mark
Model No.: PGas-21-FL
Features: Handheld PGAS-21 Methane CH4 Gas Alarm Tester
1.Electrochemical principle
2.Ex(ia) IICT3,
3.IP65
4.CE mark
Model No.: PGas-21-NH3
Features: Handheld PGAS-21 Ammonia NH3 Gas Alarm Tester
1.Electrochemical principle
2.Ex(ia) IICT3,
3.IP65
4.CE mark
Model No.: BX616
Features: BX616 Multi-gas Detector:
1.Full functions, easy operation
2.Compact design, easy carrying
Model No.: TGas-1021-CO
Features: 2-wire Fixed CO Gas Transmitter
1.range 0-500ppm
2.ExiaIICT3
3.Catalytic combustion sensor
Model No.: TGas-1021-CO
Features: Fixed Carbon Monoxide CO Gas detector
1.range 0-500ppm
2.ExiaIICT3
3.Catalytic combustion sensor
4.2-wire
Model No.: PGas-21-NO2
Features: Handheld PGAS-21 Nitrogen Dioxide NO2 Gas Alarm Measurement
1.Electrochemical principle
2.Ex(ia) IICT3,
3.IP65
4.CE mark
Model No.: PGas-21-NO2
Features: Handheld PGAS-21 Nitrogen Dioxide NO2 Gas Alarm Transmission
1.Electrochemical principle
2.Ex(ia) IICT3,
3.IP65
4.CE mark
Model No.: PGas-21-NO2
Features: Handheld PGAS-21 Nitrogen Dioxide NO2 Gas Alarm Detecting
1.Electrochemical principle
2.Ex(ia) IICT3,
3.IP65
4.CE mark
Model No.: PGas-21-NO2
Features: Handheld PGAS-21 Nitrogen Dioxide NO2 Gas Alarm Equipment
1.Electrochemical principle
2.Ex(ia) IICT3,
3.IP65
4.CE mark
Model No.: PGas-21-FL
Features: Handheld PGAS-21 propane C3H8 Gas Alarm Transmitter
1.Electrochemical principle
2.Ex(ia) IICT3,
3.IP65
4.CE mark