PGas-31 Infrared Gas Detector
1.Wide measurement range
2.Long working life
3.High accuracy
4.Simple operat
Port: ZhengZhou
Minimum Order Quantity: 1 Piece/Pieces .
Supply Ability: 10 Unit/Units per Month .
Payment Terms: T/T,.
Contact Supplier
PGas-31 Infrared Gas Detector
Brief introduction
The measurement principle of (NDIR) "Non-dispersive Dual-wavelength Infrared Spectrum" is adopted for PGas-31 gas infrared quantitative detector. There is no radiotive emitter and it is convenient to carry; the screen of hand-held probe uses OLED, it is self-luminous with high brightness, with no visual angle problem; high precision, good stability and sensitivity, and the resolution of leakage detection can reach 0.1ppm; the response time is fast; with no consumable parts, life time of the sensor is extra long; it can detect gases include C2H2,CH4,C4H10,C2H4,C2H6, C3H8,CO2,CO and SF6, etc.
PGas-31 gas infrared quantitative detector is mainly composed of two parts: the host machine and hand-held probe.
Main features
Technical parameters
Parameter | Characteristics |
Measurement principle | Infrared (NDIR) |
Measurement range | Refer to lectotype table |
Sampling mode | Pumping type |
Service temperature | -10~60°C |
Power supply | 7.2V DC, internal battery power supply |
Response time (T90s) | 1~5 second(s) |
Warm-up time | 100 seconds |
Probe unit rod length | 22cm |
Service life of sensor | >10 years |
Calibration time | Calibration once every six months |
Alarm mode | Buzzer |