Based on piezoresistive silicon technology
MEMS technology
Stainless steel construction
Intergrated, high static pressure
Port: Xian
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 10000 Piece/Pieces per Month
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact Supplier
Packaging Detail: each unit has individual box and all boxes are packed in standard packages.
Delivery Detail: in 7 days
Based on piezoresistive silicon technology, UPX30 is manufactured from piezoresistive silicon dies. This sensor has two flush diaphragms facing the pressure media, able to measure differential pressure of viscous liquids, th diaphragm form a chamber, in which oil is filled to isolate the sensing element and transfer pressure. The measured pressure is transmitted to the piezoresistive silicon sensing element through 316L isolated diaphragm and internal medium, thus to realize the precise transformation of electrical signal from pressure. This isolation enables the sensor to measure the pressures of corrosive fluids as well as electro conductive liquids.
This sensor is tested by computer automatically, and is compensated by laser trimming for zero and sensitivity. Its profile and assembly size have good interchangeability with some overseas' general products.
UPX30 pressure sensor is designed for easy installation with O-rings as sealing method, it is widely used for differential pressure measurement in many industrial process control areas.
Features:
Features
* Computer tested, laser trimming compensation
* Good performance, high reliability
*Imported pressure silicon dies
* Intergrated, high static pressure
* Isolated-type structure, suitable for many kinds of medium measurementium
Speifications:
| pressure medium | gas liquid compatible to stainless steel |
| pressure ranges | 0~0.35,0~1,0~2.5,0~4,0~6,0~10,0~16,0~25,0~35(bar) |
| pressure type | differential(D) |
| overload pressure | 250%FS(positive end),100%FS(negative end) |
| accuracy | 0.25%FS (standard), 0.5%FS |
| output signal | ≥70mV (typical) |
| zero offset | ≤±3mV |
| system pressure | 4MPa |
| excitation | 1.5mA(not exceeding 2mA) |
| compensated temperature range | 0~+70°c |
| operating temperature range | -20~+80°c |
| storage temperature range | -40~+100°c |
| temperature coefficient of zero | 0.2%FS/10°c |
| temperature coefficient of span | 0.3%FS/10°c |
| input/output resistance | 2~6kΩ |
| insulation resistance | 100MΩ @ 50VDC |
| response time (10%~90%) | ≤1ms |
| electrical connection | 4-wire |
| material of pressure membrane | 316L |
| material of housing | 316L |
| sealing | fluoro-rubber sealing ring |
| filled oil | silicon oil, or olive oil (hygienism) |
| wire | 4-color silicon rubber shielded flexible wires |
| vibration | 20g/ (20~5000Hz) |
| service life | >1x108times |
Model No.: P15
Features: HBM P15 pressure gage transducers are suitable for measuring static and dynamic pressures of liquids and gases.
Model No.: P8AP
Features: HBM P8AP - Absolute pressure transducer for static and dynamic liquid and gas pressure
Model No.: P15
Features: HBM P15 pressure gage transducers are suitable for measuring static and dynamic pressures of liquids and gases.
Model No.: PT211 Series
Features: 1.Pressure Range: 0~500pis~30000psi
2.Accuracy: 0.25%FS,0.5%FS,1.0%FS
3.Probe Temperature: 80~150C
4.Pressure Sensor
Model No.: PT2104
Features: 1.Pressure Range: 0~500pis~30000psi
2.Accuracy: 0.25%FS,0.5%FS,1.0%FS
3.Probe Temperature: 80~150C
4.Pressure transmitter
Model No.: exp112
Features: pressure transmitter EXP112
1,long term stability ,high accuracy
pressure transducer transmiter
suitble for chemical
Model No.: PT6** Series
Features: 1. Melt pressure transmitter
2. Melt pressure transducer
3. Melt presure sensor
4. CE, ISO Standard
5. SAND Manufacturer .
Model No.: PT211 Series
Features: 1.Pressure Range: 0~500pis~30000psi
2.Accuracy: 0.25%FS,0.5%FS,1.0%FS
3.Probe Temperature: 80~150C
4.Pressure Sensor
Model No.: PT2104
Features: 1.Pressure Range: 0~500pis~30000psi
2.Accuracy: 0.25%FS,0.5%FS,1.0%FS
3.Probe Temperature: 80~150C
4.Pressure transmitter
Model No.: PT211 Series
Features: 1.Pressure Range: 0~500pis~30000psi
2.Accuracy: 0.25%FS,0.5%FS,1.0%FS
3.Probe Temperature: 80~150C
4.Pressure Sensor
Model No.: PT211 Series
Features: 1.Pressure Range: 0~500pis~30000psi
2.Accuracy: 0.25%FS,0.5%FS,1.0%FS
3.Probe Temperature: 80~150C
4.Pressure Sensor
Model No.: PT2104
Features: 1.Pressure Range: 0~500pis~30000psi
2.Accuracy: 0.25%FS,0.5%FS,1.0%FS
3.Probe Temperature: 80~150C
4.Pressure transmitter