Application
- Tracing of loaded and dead cables, metal pipelines (depth up to 6 m,distance of 5 km from the transmitter connection point)
- Tracing nonmetal pipelines by acoustic method.
- Water leak detection.
- Pinpoint of the cable damages by acoustic and electromagnetic methods.
- Selection of the cable from a bunch.
- Detection of the places of pipes depressurization (3 m depth)
- Survey of areas before the ground-works performing
- Tracing of buried utility lines placed in channel laying and in non-channel laying by electromagnetic and acoustic methods.
“Athlete TPT -522” – a multifunctional kit, which combines three devices:
- Route locator with acoustic sensor
Features:
1. Using the variable power transmitter AG-144 (7,5 W–180 W) and impact device “UM-112” (Unique!).
2. Complete absence of “parasitic” breakthrough on neighboring pipes.
3. High accuracy of location.
Acoustic method is used for tracing of metal and non-metal pipelines, especially under noise interference conditions when the electromagnetic localization is difficult to apply.
- Cable route locator with electromagnetic sensor
Features:
- The possibility to select the power from 7,5 and up to 180 W.
- Generation of sinusoidal AC is applied (constant or temporary pulses).
- The transmitter automatically determines the resistance of the load in the pipelines or cables and generates on its base certain power for a long period of operation (up to 18 hours in case the low power is chosen).
- 1. Water leak detector with acoustic sensor
Features:
1. High sensitivity of acoustic sensor.