1.packaging test instrument
2.professional, operation easy
3.Accuracy +/-1%
4.Test speed 12~350 mm/min
5.warranty 3 years
Port: Yantian
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 300 Set/Sets per Month According to the requirement
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact Supplier
Packaging Detail: By standard export wooden case
Delivery Detail: Within 15 working days when get 30% down payment
New packaging test instrument
Equipment summary:
The packaging test instrument used to detect compressive strength of cartons, containers and other packaging structure, dynamic holding pressure technology, simulate stacking the test of pile, in order to know the compressive strength and impact-resistant capacity of product packaging on the transportation, stacking process. Its data can be used as packaging design, assembly and construction.
Features:
1.Taiwan AC inverter motor drives, synchronous belt drive;
2. Adopts the gap ball screw lift, precision stable;
3. With the U.S. high-precision explosion-proof type LOAD CELL;
4. Measured using microcomputer control, dual-LCD display: compressive strength value , maximum compressive strength value (maximum crushing strength), displacement, carton deformation (when the carton crushing deformation), etc. 4 values
5. To adopt Japanese high-precision measurement of displacement encoder;
6. Automatically print test data
corresponding standard :
[testing standard]:GB/T4857.4 GB/T4857.16 ISO2872,ASTM D642
[manufacturing practices]:GB/T16491,TAPPI-T804,JIS-Z0212
Applicable Industry:
Applicable to all factories and enterprises, technical supervision departments, the commodity inspection authorities, research institutes and other departments for testing and researching.
Technical parameter:
| Model | HZ-6001A New packaging test instrument |
| Units | kgf, Ibf, N, |
| Resolution | 1/10,000 |
| Accuracy | ±1% |
| Display | HZ-2000 LCD display |
| Compression space | 100*100*100cm(or designated) |
| Control system | AC converter, gear, Motor |
| Test speed | 12~350mm/min |
| Protector | Leakage protection, overload auto-shutdown, displacement limit protection |
| Printing | Automatic printing the result, Print (maximum power, average, automatic abtained-point value, the breakpoints ratio, date) |
| Volume | 153×121×180cm |
| Power | AC 220V, 5A |
Model No.: HS--tcm-5
Features: tester adopts Japanese pointer dial, which can automatically point the location from 20Kg to 50Kg
Model No.: NT3000
Features: NT3000 is a kind of fuel injection pump test bench adopt industrial pc with color CRT.
Model No.: TT-10
Features: 1.Use: the taping rally test of a variety of surface mounting devices (SMD)
2. Cited spin-off speed: 300mm per minute
Model No.: MY-LT-360R
Features: In line with international standards, can through the third party inspection
Model No.: XH-401CE
Features: XH-401CE Open mixing mill
1.Taiwang gear motor
2.Built-in heater
3.Electrical heating and cooling system
4.CE Mark
Model No.: SML-868TS
Features: Lan cable scanning tester
1.to check various circuit status.
2.to search the cable wanted.
Model No.: YDS
Features: shaker screener:
1.ISO:9001:2008,CE standard
2.MOQ:1 piece
3.Used in lab for testing granule,ultra-fine powder
Model No.: RYQ-10
Features: turbo balancing machine
is widely in engine balancing
wind motor balancing
turbocharger balancing machine
Model No.: XZS200
Features: ST Lab Test
1.Low consumption, low noise
2. saving energy ,requiring environmental protection standards.
3.simple maintenance
Model No.: 12PSB-IIIA
Features: 12PSB-IIIA Injection Pump Testing Machine: (1) test diesel mechanical pump;(2) digital meter display; (3) High quality.
Model No.: YD-2
Features: YD-2 Tablet hardness tester
Small GMP tablet hardness tester is detecting breaking hardness of tablet
Auto-test,auto-diagnose
Model No.: ZLT-LWM1
Features: Conform to IEC60598-1 clause 4.12.5