Near Infrared Intelligent paper moisture & basis-weight tester shows the measuring result of vertical and horizontal curve.
Port: dalian
Minimum Order Quantity: 1 Set/Sets none
Supply Ability: 1000 Set/Sets per Year none
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: cardboard boxes
Delivery Detail: within 15days after receipt of full payment
Near Infrared Paper Moisture & Basic Weight Meter:
Brief Introduction.
TheVR IIIA near-Infrared basis-weight paper moisture tester(LED display,touch- liquid crystal display shows the measuring result of vertical curve and horizontal curve and these result can be stored.)
Main Features:
1.The Near- Infrared measurement has neither radioactive pollution nor toxic side effects to enviroment and human body, leaving out all kinds of elaborate formalities for isotopes quantometer and saving the high fees of conserve for the half-life radioactive source
2.Adopting one sensor to detect basis-weight and moisture simultaneously,which realize the fast and accurate measurement with low cost.
3.with the advanced semiconductor refrigerating technique controls the sensor temperature,the instrument can assure the stability measurement and it equiped no cold-water equipment.
4.The precise automatic adjustment error technique saves frequent sampling and makes the operation more easily.
5.The instrument furnished the standard RS485 and 4~20mA output interface and can link with other equipment.
6.the instrument can work under terrible environment and its operation voltage can be adjusted in very wide range.
The parameters:
| measuring range | basis weight10—500g/m2 |
| moisture 0~20% | |
| measurement accuracy | 10g/m2≤basis weight<100 g/m2error( Q)≤±0.5g |
| 100 g/m2≤basis weight<500g/m2error( Q)≤±1% | |
| the moisture measurement accuracy | basis weight<200 g/m2error( Q′)≤±0.2% |
| 200 g/m2≤basis weight<500g/m2error( Q′)≤±0.2% | |
| measuring response time | τ≤50ms |
| signal output | digital output RS485 |
| analog output 4~20mA | |
| RS485 standard communication interface | |
| environmental challenge | humidity≤ 80% |
| temperature 0~50°C | |
| working volt | 220V±10% 50Hz |
| consumed power | 20w |
Photos of field application:
Model No.: STFJ-1
Features: +CE Norm
+Use for molding of the unconfined specimens
+ Max. Load: 400KN
+ The up and down plate is made of steel plate
Model No.: JKS
Features: JKS Alkali-Aggregate Testing Cabinet
1. alkali-aggregate testing cabinet
2. voltage : 220V
3. heating power: 4000W
Model No.: FZ-31A
Features: FZ-31A Cement Le Chatelier Steam Tank
1.Effect capacity: 31litre
2.Heating time controlling:3hours
Model No.: CRS2000
Features: common rail general test bench(TLD-CRS2000)
1.easy to operate
2.high technology
3.test accurate
Model No.: II
Features: the integration of workstation type test bench(TLD-II)
1.cylinder number:12
2.high technology
3.test accurate
Model No.: II
Features: the integration of workstation type test bench(TLD-II)
1.easy to operate
2.high technology
3.test accurate
Model No.: II
Features: integration of workstation type test bench(TLD-II)
1.easy to operate
2.high technology]
3.test accurate
Model No.: II
Features: TFT LCD industrial type test bench(TLD-II)
1.easy to operate
2.test accurate
3.high technology
Model No.: II
Features: integration of workstation type test bench(TLD-II)
1.easy to operate
2.high technology]
3.test accurate
Model No.: STHJX-2
Features: STHJX-2 environment testing cabinet
1.precise meter
2.automatical
Model No.: STGS-2
Features: STGS-2 Concrete Drying Shrinkage Testing Chamber
1. concrete drying shrinkage testing chamber
2. automatic record temperatur
Model No.: III
Features: LCD display diesel fuel injection test bench
1.12 cylinders
2.easy to operate
3.good quality