NTL-1000 Series of Mechanical Thermostat - NTL-8000

1.NTL-1000 Series of Mechanical Thermostat

2.Large setting range
3.Small Size
4.Simple to mount
5.Hight switching performance

NTL-1000 Series of thermostats are usually used on the commercial, industrial and civil constructions, which can control the fan coil of air-conditioning, wate valve and wind valve and ect. It can make the temperature balance in the setting range in the location, and all switches are manual switch. Very simple to manipulate.

Characteristics

1 Dialing button for setting the temperature: the place the finger points to is the current temperature value.

2 ON/OFF Switch for system: press O/OFF Key to turn on/off of the thermostat

3 Working mode switch: press HEATCOOL key to switch the heating/ Cooling mode.

4 Fan speed key: L-M-H, that is low speed-middle speed-high speed, wind valve controller does not have this function.

Function spec

NTL-1000A: 2 tubes fan coil controller, can be set up to control the fan coil. 3 gears of fan coil, 2 and 3 wire of motorized valve, magnetic valve on/off wind valve, 3 wires of wind valve

NTL-1000B: 4 tubes fan coil controller, can be set up to control the fan coil. 3 gears of fan coil, 2 and 3 wire of motorized valve, magnetic valve on/off wind valve, 3 wires of wind valve.

Technique parameters

5 Temperature controlling range; 10-30

6 Working voltage: 230vac±10%, 50/60HZ

7 Current load: <3A(resistant load)

8 Sensing element: box with the gas.

9 Temperature differential: 1°c(at the 25°c)

10 Storing environment: temperature:-20°c-55°c, relative humidity: RH<92%

11 Surface material: ABS engineering plastic, manual switch is OFF-white, the rest is ivory-white

12 External dimesion: 85x130x40mm(WxHxD)

13 Installation: Standard 86 installing box

Type: NTL-1000A , NTL-1000B, NTL-1000C , NTL-1000D