1.NDIR infrared CO2 module inside
2. 3X 0~10V analog outputs or 3X relay dry-contact outputs
3.LCD display and RS485 optional
Minimum Order Quantity: 10 Unit/Units
Supply Ability: 3000 Piece/Pieces per Month
Payment Terms: T/T,Paypal
Contact Supplier
| Gas detected | Carbon Dioxide (CO2) |
| Sensing element | Non-Dispersive Infrared Detector (NDIR) |
| Temperature sensor | NTC |
| Humidity sensor | HS series capacitive sensor |
| Temperature dependence | 0.2% FS/ |
| Temperature correction | Self compensation |
| Power supply | 220VAC, 110VAC or 24VAC, 50/60HZ±10%, selectable with the order |
| Consumption | 3.5 W max. ; 2.5 W avg. |
| Accuracy@25(77) | ±40ppm + 3% of reading |
| Stability | <2% of FS over life of sensor (15 yr typical) |
| Calibration interval | ABC Logic Self Calibration Algorithm |
| Non linearity | <1% of FS |
| Pressure dependence | 0.13% of reading per mm Hg |
| Altitude calibration | Programmable from 0-9,900m in 100m increments |
| Response Time | <2 minutes for 90% step change |
| Signal update | Every 2 seconds |
| Warm up time | 24 hours (first time) 5 minutes (operation) |
| CO2measuring range | 02,000ppm (default) 020,000ppm, programmable selection 050,000ppmt |
| CO2setting & Display resolution | 1ppm |
| Temperature measuring/ setting range | 050(32122)/ 545(41113) |
| Humidity measuring/setting range | 099%RH/ 595%RH |
| Analog output | 010VDC linearized output or PID control output, selectable by end users |
| Output resolution | 10Bit |
| Relay output | One or two dry contact outputs with programmable selection to control CO2, temperature, humidity Rated switching current: 3A(220VAC/30VDC), resistance load |
| Communication interface | RS-485, 9600/14400/19200(default)/28800 or 38400bps (programmable selection), 15KV antistatic protection, 3 independent base address, max network node 64 |
| Flow rates | Diffusion version 80 ~ 120 cc/min Flow through version 40~50cc/min |
| Operation conditions | 0~50(32~122); 0~95%RH, non condensing |
| Storage conditions | -40~70(-40~158) |
| NDIR life | 15 years |
| Weight | 360g |
| Dimensions | 130mm×90mm×40mm |
| Installment standard | 65mm×65mm or 2×4wire box |
| Interface connections | Maxi. 9 terminals |
| Wiring standard | wire section area<1.5mm2 |
| Approval Standard | CE-Approval |
| Programming and selection | Via internal jumpers and push-buttons on the panel |
1) CO2 monitor multiple control functions and high performance with low price
2) Application in all ventilation systems, or public places
3) Wall mounting type and duct type selectable
4) Built-in pump type for some special applications
5) LCD display detecting both CO2level and temperature, also relative humidity (optional)
6) NDIR infrared CO2sensor with special ABC_Logic Self Calibration System and 15 years long lifetime. It makes the CO2 measurement more accurate and more reliable.
7) Specially provide the altitude calibration
8) Microprocessor control, quick response, high precision
9) Providing strong control outputs with up to three 0~10V analog outputs and three relay dry-contact outputs
10) The analog output with two alternatives: PID control output or linearized over full range output
11) Different control mode for delays selected by users applications such as ventilation systems or greenhouses
12) Locale adjustable range of CO2: 0~2,000ppm/0~5,000ppm/20,000ppm/ 0~50,000ppm;
adjustable range of temperature: 5~45adjustable range of humidity595%RH
13) RS-485 communication interface optional, 15KV antistatic protection, independent base address setting
14) Specially provide a simple CO2 controller with 6 indicator lights and a relay output to control a fan
15) CE-Approval
Model No.:
Features: SA40EZ is the miniaturized ultrasonic thickness gauge that can measure wall thickness and velocity.
Model No.:
Features: SA50 thickness meter is controlled by micro-processor based on the ultrasonic measuring principle.
Model No.:
Features: The serial of GT glossmeters are designed and manufactured according to international standard
Model No.:
Features: SADT HB SCALER is an optical measuring system which can automatically measure the size of indentation from Brinell hardness test
Model No.:
Features: SC20 portable color difference meter ( color meter) is widely applied to quality control of plastic and printing industries
Model No.:
Features: SADT gloss meter GT60N is the one of the smallest gloss meters in the world
Model No.: SADT
Features: Ra:0.05um-6.3um/1u"-250u"
Rz:0.2um-50.0um/8u"-999u"
Ry/Rmax:0.2um-25um/8u"-999u"
Resolution:0.01um/1u"
Cut-off:0.8mm/0.30",
Model No.:
Features: A portable instrument which can perform on-site hardness test on soft metals in accordance with American Standard ASTM B647
Model No.: JC-YBS-DX
Features: 1easy to take and convenient to use
2Can make both plus-minus pressure
3Own power supply
4 With RS232 interface available on-
Model No.:
Features: Unique ergonomic design provides direct line-of-sight viewing of display and target
Easy reading 5 digit LCD display
Model No.:
Features: ST 5900 is a handheld digital ultrasonic thickness gauge with a fixed velocity 5900m/s
Model No.:
Features: SUD10 digital ultrasonic flaw detector can be quick and easy, noninvasive, accurate manner workpiece internal faults .