Product Features:
1)Monitor And Controller
2)Best quality
3)Prompt delivery
4)Reasonable price
Business Terms:
Port: delhi
Minimum Order Quantity: 1 Piece/Pieces any
Supply Ability: 5 Piece/Pieces per Month any
Payment Terms: T/T
Contact Supplier
1)Monitor And Controller
2)Best quality
3)Prompt delivery
4)Reasonable price
Port: delhi
Minimum Order Quantity: 1 Piece/Pieces any
Supply Ability: 5 Piece/Pieces per Month any
Payment Terms: T/T
Contact Supplier
Packaging Detail: wooden box
Delivery Detail: 3-4 weeks
Specification:
| Sensor Type | Analytic GSS Technology Gas Sensitive Technology |
| Sensor | VOC 0-500 ppm |
| 0-5V out scale | 0 – 500 |
| LDL | 1 ppm |
| Accuracy | ± 10 ppm 0 - 200 ppm ± 10% 200 - 500 ppm |
| Resolution | 1 ppm |
| Response Time (T90) | < 60 s |
| Sampling Method | Fan |
| Operating Temp | -0°C to 40°C |
| Relative Humidity | 5 to 95% (non-condensing) |
| Operational mode | Continuous control or Alarm |
| Warm up time | 10 minutes (max. Accuracy) |
| Display | 3.5 digit LED |
| Relay set point | User configurable |
| Digital output | RS232 |
| Analog output | 0 - 5 VDC (8 bit) |
| Relay output (no internal alarm) | 24 V; 5A (max.) |
| Alarm option (no relay output) | Internal piezo 85 db @ 30cm |
| Power supply | 12 VDC; 800 mA; Plug - in AC power adaptor |
| Enclosure rating | IP20 & NEMA 1 equivalent |
| L x W x H | 200 x 120 x 85 (mm) |
| Weight | 700 gms |
| Approvals | Part 15 of FCC Rules EN 61000 -6-3: 2001 |
Model No.: ST-DFIM
Features: End of Fabric Roll Automatic Stop Sensor
Full Width Fabric Inspection
Consistent Roll Output
Model No.: UD3-71
Features: UD3-71 is an ultrasonic flaw detector which is intended for manual non-destructive testing of products for detection of defects.
Model No.:
Features:
Model No.: JJLYL
Features: Series IIJ-II is a fully automatic tester for determination of the dielectric breakdown voltage of insulating liquid. It has bee
Model No.: 1312
Features: Microprocessor Photo Colorimeter 1312
Model No.: LS860
Features: LS860 Luminous Intensity Distribution Tester is a precise electronic instrument for measuring LED luminous intensity.
Model No.: LS600
Features: 1.Aging functions: constant current, impact pulse, on-off mode
2.Range of output current: 1-1000mA
Model No.: Monitor 4
Features: - Light in weight, portable
- Detecting alpha, beta, gamma, and x-rays over 3 selectable ranges
- Design ergonomic
Model No.: ST-WFIM
Features: Full Width Fabric Inspection
Selvedge Shifting Device
Edge alignment photo-sensor
Model No.: VD3-81
Features: Eddycon VD3-81 is intended for manual testing by eddy current technique for the presence of surface and subsurface defects.
Model No.:
Features:
Model No.: YWX/Q-010
Features: Saline Spray Testing Machine
it is widely used in electronic, electrical and automotive, motorcycle, hardware tools.