Moisture Analyzer
1.Halogen Lamp Heating
2.LCD Screen,Weight:7.5kg
3.Reliable reading,Dia:110mm
4.Temperature:50-200,RS232
Port: Shenzhen
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 2000 Set/Sets per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: 54*45*51cm
Delivery Detail: 1-3 days
Moisture Analyzer
(LSC-50)
Moisture Analyzer widely used in
-Industrial applications
-Agriculture applications
-Laboratory applications
Some typical applications are: Tobacco, paper, food, tea, corn, chemical, row materials, pharmaceutical material and textile material etc.
LSC-60 wood moisture meter
Moisture Analyzer is configured on the basis of high-precision electronic balance weighing sensor and high-efficiency secondary heat radiation device, to achieve rapid and accurate determination of the water. Moisture Meter is a thermodynamic theory based on the material after drying by the weight and wet weight than the percentage of access to content and gouache other results.
1. Using analytical balance sophisticated sensors to ensure high-precision weighing.
2. As the use of high-sensitivity sensors, the test only a few grams of sample with the quality, reduce testing time
3. Use of 500W halogen lamps designed to be of secondary radiation heating source, the sample temperature reached 200 degrees within 2 minutes.
4. Has three kinds of measurements:
1)Automatic mode: Measuring the process of per-minute rate of change of moisture content (drying rate) less than the preset value, the measure will automatically stop, and get measurements.
2)Timing mode: at a scheduled time to complete drying the sample, and get measurements.
3)Manual mode: button operation can be terminated by the determination and get measurements
.
5. They are equipped with a standard serial interface,connecting to printer or computer.
6. They can be calibrated weighing system and temperature system calibration.
Weight range (g) | Readability | Measuring scope | Data output |
LSC60 : 0-100g LSC50: 0-50g | LSC60:0.01%/0.001g LSC50: 0.01%/0.1mg | 0.01%-100% | RS232 |
Heater | Temperature range | Display content | |
Halogen-lamp’s heating | 50°C-200°C | Moisture percentage, primary weight, primary temperature ,final weigh, final temperature | |
Pan size | Dimension | Weight | Recommended analytical weight |
Dia:110mm | 350*200*260mm | 7.5kg | 1-10g |