Specifications and Product Details:

Imported high-speed thermal printer core support on the spot printing, paper imports to ensure long-term data be stored for long.
Relying on stable low-power IC design
HL-600 Portable Leeb hardness tester measurement based on the principle, you can quickly and easily measure a variety of metal materials, immediately shows the hardness measurements at the same time, the system's available in a variety of hardness (Brinell HB, HRC Rockwell , Vickers HV, Shaw HS) freely switch between, can be pre-set tolerance limits, out of range alarm. The product is the host and micro-high-speed thermal printer integrated design, imported high-speed printer-core support on-site instant printing capabilities, import data to ensure long-lasting long-term storage of paper. Relying on stable low-power IC design IC, standard high-capacity, long life, high-speed rechargeable NiMH battery pack. All Chinese display, menu-driven operation is simple and convenient, seven-shaped impact devices without calibration, automatic identification, USB interface, transfer, mass storage, together with PC, user-friendly data processing software.

Technical parameters:
Measuring range: (170-960) HLD, (17.9-69.5) HRC, (19-651) HB, (80-1042) HV, (30.6-102.6) HS
Measuring direction: support for 360-degree (vertical downward, oblique, horizontal, oblique, and straight up)
Measuring material: steel and cast steel, alloy tool steel, stainless steel, gray iron, ductile iron, cast aluminum, copper and zinc alloy (brass), copper-tin alloy (bronze), copper, forged steel
Hardness standard: Leeb (HL), Brinell (HB), Rockwell B / C (HRB / C), Rockwell A (HRA), Vickers (HV), Shaw (HS)
Display: dot matrix LCD, 128 × 64 dot matrix LCD
Data storage: up to 500 groups (impact times 32 ~ 1)
Thermal printer, working quietly, can print any number of copies of the test results, to meet the needs of the scene
Paper width: (57.5 ± 0.5) mm; paper roll diameter: 30mm
Operating voltage: 6V Ni-MH battery pack; charging power: 9V/500mA; 2.5 to 3.5 hours charging time
Continuous working time: about 150 hours (do not print, do not open the backlight); communication interface standard: USB1.1

Application materials:
Steel and cast steel, alloy tool steel, stainless steel, gray iron, ductile iron, cast aluminum, copper and zinc alloy (brass), copper-tin alloy (bronze), copper, forged steel
Fourth, the working conditions:
Ambient temperature: Operating temperature -10 ~ +50 °C; Storage temperature: -30 °C ~ +60 °C; relative humidity ≤ 90%;
Strong vibration-free environment, without a strong magnetic field, non-corrosive medium and severe dust.

Product Features:
Leeb hardness measurement based on the principle, can detect a variety of metal materials, with software calibration.
A host can be equipped with seven different impact devices, automatic identification of the impact of device type, be replaced without recalibration.

Support forged steel material, when using D / DC-type device to test the impact of forged the sample, it can directly read the HB value, without manual look-up table.

Hardness values can be present upper and lower limits, out of range alarm, user friendly batch testing needs.

Large-screen 128 × 64 dot matrix LCD display, information-rich, and intuitive.

All English display, menu-driven operation, easy and convenient. EL-backlit display for easy use in dimly lit environments.

Can store up to 500 groups (impact times 32 ~ 1), hardness measurements, each measurement data, including single, average, measurement date, impact direction, frequency, material, hardness, and other system information.
Thermal printer and integrated into one instrument, working quietly, print speed, print the test report can be on-site.
Built-in NiMH rechargeable batteries and charge control circuit; can work for not less than 150 hours, with automatic sleep, automatic shutdown and other power-saving features.
The remaining charge indicator on the LCD icon displays the remaining battery power in real time; with charging indication, the operator can readily understand the charge level.

A USB interface, you can quickly and easily exchange data with the PC. Can be equipped with computer software, with transmission measurements, the measured value storage management, statistical analysis of measured values, print the report measured values, set the instrument parameters such as volume feature-rich, quality assurance and management to meet the higher requirements.