Mobile phone key-press life tester
1.high quality and best price
2.opration convenience
3.in stock
4.3 years warranty
Port: yantian
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 300 Set/Sets per Month
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: by export standard wooden case
Delivery Detail: with 15 working days after receive 30% down payment
Mobile phone key-press life tester HZ-5012
Machine summarization:
This mobile phone key-press life tester is special equipment , mainly used for the key of electronic products on the fatigue test. Applied for various buttons durable life test on the constant pressure load. Reasonable design, clamping convenient and reliable.
Meet standard:
The communications industry standard of the People's Republic of YD/T 1539-2006
main feature:
1.The mobile phone key-press life tester with two independent station test, can test two parts, with a set of control system, the system could control two workpiece testing independently, and set the conditions for each screen. Convert a picture if need to see test condition and results, that is not influence the another test, equivalent to independent control.
2. Per sample can be tested six key (not at the same time in down, is a continuous movement, for example in the 1-2-3-4-5-6 successively after six key sequence for a test cycle).
3. Separate fixtures, can adjust the test sample positioning, different size height.
4. Per sample to independent control operation, not affected by other mobile phone restrictions.
5. The controller can control the cylinder pressure time, For example test switch keys, simulation the actual conditions of the key test, Put down keep a few seconds to startup, raise after receive the response of startup, Then will go down is shutdown action, keep a few seconds off sure it executive. Every action by the time needed according to different sample can adjust the press time (test head down, and rise, the keep time can be adjusted).
6. Test head is half spherical contact, the requirement is silicon materials, LXD is more than 80 degree
7. Controller for feeling type, the operation interface simple to grasp.
8. dual-cylindrical fitter.
9. Key test head and sports cylinder can detachable to cleaning.
10. The controller is designed face operator, with the machine as a body, concise and easy.
11. The stainless steel inferior smooth surface material, positioning jig, quality is reliable, the beauty is generous.
Technical parameters:
Model | HZ-5012 mobile phone key-press life tester | |
Testing speed | achieve 10-60times/min | |
Testing times | Continuous testing 100000 times | |
Key pressure | 50~500g | |
Contour dimension | 370*530*510mm | |
Weight | 35kg | |
Power | AC220V/50HZ | |