Mitech MEW-W series microcomputer control hydraulic universal testing machine Mitech MEW-W

Mitech MEW-W series microcomputer control hydraulic universal testing machine - Mitech MEW-W

MEW-W series used for testing of mechanical properties. - more info check here: http://www.buymeasuringtools.com/Mitech-MEW-W-series-microcomputer-control-hydraulic-universal-testing-machine-10175551/

Quick Brief

Place of Origin: Beijing China (Mainland) Brand Name: MITECH Model Number: Mitech MEW-W

Specifications and Product Details:

I. Main purpose

MEW-W series microcomputer control hydraulic universal testing machine can be used for testing of mechanical properties such as tensile, compression, bending and shearing of metal and nonmetal materials, can achieve the closed loop control over testing force, displacement, deformation, stress and strain and can edit the control modes independently. With more than one hundred standard modes inside it, the machine can carry out the analysis on data fully according to the standard requirement and achieve print and internet transmission of the test results.

III. Introduction to the software

Input of specimen information:The human-machine interface is adopted to analyze, calculate and test the indexes on mechanical properties of the material and calculate automatically elastic modulus, yield strength and non-proportion elongation stress etc. after the test is completed. It is visualized and convenient, improving the analysis accuracy.

IV.Main technical parameters

Main technical parameters	MEW-W
	100D		300D	600D				1000D			1000A
Maximum testing force (KN)	100		300	600				1000			1000
Force measuring range	2%~100% (or 1% - 100%)
Relative error on indicated values of testing force	Better than ±1% (≤±0.5%) of the indicated value
Deformation precision	±1% (or ±0.5%)
Tensile space	550mm					600mm		600mm	600mm		700mm
Compression space	≥500mm										650mm
Clamping type	Manual clamping	Manual clamping/Automatic clamping
Clamping diameter of round specimen (mm)	Φ6-Φ26				Φ13-Φ40						Φ13-Φ60
Clamping thickness of flat specimen	0-15mm				0-30 mm						0-40mm
Diameter of shearing specimen	10 mm (Alternative)
Dimension of upper and lower press board	Φ120mm (Alternative 204×204 mm)
Maximum distance between bending fulcrums	Optional
Power of oil pump motor	1.5KW
Power of beam up-down movement motor	0.5KW
Deformation testing device	Extensometer
Safety protective device	Software protection and mechanical limit protection
Net weight (Kg)	1900		2100		2600		3500			4000