Mine Gold detector gpx4500
4.show the capacity of electricity
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 200 Piece/Pieces per Month
Payment Terms: T/T,Western UnionContact Supplier
Packaging Detail: aluminum box/carton box,double protection
Delivery Detail: 3~7 work days after payment
GPX4500 is a high performance metal detectors, made by a strength of more than 10 years of professional detection equipment manufacturer .This detector’s sensitivity and stability enjoy the highest level among domestic products. In addition, The most prominent characteristics is that the type of metal can be identified, allowing you to easily find the available metal objects .which is the functions that other similar products are not available. You can go to more places to start treasure-hunting activities, search for coins, jewelry, gold and silver products with PALCON.
1. High-brightness LED panel can generally displays the detected metal type according to the signal strength.
2. the all-metal detection mode is suitable for searching metal objects on the ground, and can be a simple recognition of metals
3. In addition to LED panel display, it can distinguish metal type by tones
4. 9.5-inch disk waterproof probe that can detect in the shallow water.
5. equipped with an external headphone jack ,connected to a single-channel headphones (headset-owned), easy to use; built-in high-capacity rechargeable battery, a low-voltage t function, with charger, Worked continuously for more than ten hours whenfull of power
2, Signal Frequency:9.6KHz
3, Audio Frequency : 400Hz
4, Power Supply:DC12V( Built-in rechargeable battery)
5, Power Consumption:0.8W
6, Connecting Rod Length: 1.3m
7, Coil dimension:40cm
8, Net Weight:8Kg
9, Gross Weight:10.5kg
10, Package Size:600*360*160mm
Pesentation ofHeadset use
Specific Operation Method Introduction
1,Select metal detector model:Detecting precious metals,first of all is to find metal,so the user should first make use of metal detection mode of operation is to take the operating mode switch to GND BAL model.
2,Zero-point adjustment.Don't be set on the high sensitivity after power on.sensitivit rotary knob to 12 o'clock position you can.The detectors mentioned,so that the probe with the ground distance of at least 1m,and then hold down the reset switch at the same time,tuning knob clockwise rotationTUNE into the red zone until the speaker to hear the siren up.Zero-sector regulation and accurate or not will directly affect the detector sensitivity and stability.
3.Horizon Set:Regulate the zero point,and then release the reset switch,rotary balance buttonto the P zone,the probe 2-5cm from the ground,you will hear zero point adjustment with the same alarm time.If the sound high,counter-clockwise rotation to balance button to lower the sound;If the sound is too low,balance the knob clockwise to adjust to the appropriate intensity of the sound.Note:each of the adjustment to balance button,you need to press a reset switch until you hear the same siren.
4.Sensitivity Settings:The normal role of the sensitivity not to set too high,usually rotary knobrefers to 12o'clock position you can,each adjusted according to look after the sensitivity reset switch.Search in high-mining area.The sensitivity should be set lower,the distance between the probe and the ground should be higher,while the normal use,the probe 2-5cm away from the ground,slowly moving horizontal sweep can be.
5.Remove interference and reset operation:If the probe find any metal objects,you will hear the sound of an alarm,LED signal lights turn on and will accordingly;if you hear the different voices,and sirens were found during or in the detection of abnormal machine alarm when please press the reset switch,and then release the reset switch,and you'll hear with the zero point and the balance between the regulating profession is the same voice,began to repeat the operation until you adjust to the appropriate sound.If the alarm sound unusual,but the operation can not achieve the desired results,please turn off the power to re-operation again.
Metal type available for direct panel description:
To detect ferrous metals,the panel does not have any instructions,DISC directed non-ferrous metals category article for instructions,the base of non-ferrous metals including gold,gold and silver mixture,25cents,silver,1 U.S.Dollars of several metal types,and sometimes the instruction onboard multiple instructions at the same time of light,indicating the target of the metal element content of more complex and requires a lengthy experience to use and can accurately detect the object to determine what kind of metal objects generally belong to.