0~35bar...2000bar, measuring melt pressure and temperature simtaneously.Internal shunt calibration signal of 80%FS.
Port: Xian
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 10000 Piece/Pieces per Month
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: each unit has individual box and all boxes are packed in standard packages.
Delivery Detail: in 10 days
UMPB series melt pressure transmitters are developed from strain gauge technology. The UMPB are constructed with a full bridge strain gauge circuit and 100% made from stainless steel material. In addition, the pressure diaphragm features a surface treatment with special alloy coating for all the UMPB models. Both the rigid stem and flexible extension provide thermal isolation to UMPT’s electronic circuitry, which enable UMPB suitable for melt pressure and melt temperature measurements.
UMPB-d melt pressure transmitter is manufactured by using a temperature sensor based on UMPB-c, suitable for melt pressure and melt temperature measurements. Its performance is same as UMPB-c.
UMPB series melt pressure transmitters are widely used for melt pressure measurement and control in chemical fiber equipments, plastic and rubber manufacturing equipments, medicine equipments, food processing equipment etc.
Features:
*Integrated stainless steel construction ;
*Good stability & realibility;
*Internal shunt calibration signal of 80%fso;
*Hastelloy-C diaphragm available on special request;
*Zero & span adjustable;
Speifications
pressure ranges | 0~10bar...2000bar |
overload pressure | 200%FS |
output signal | 3.33mV/V(for transducer);4~20mA.0~5V,0~10V,1~5V |
accuracy | 0.25%FS,0.5%FS(standard),1%FS |
load resistance | RL=(U-12)/0.02A(4~20mA current output) U-loop voltage(V) |
long-term stability | <0.2%FS/year |
supply voltage | 10V DC(for transducer); 12~36VDC |
compensated temperature range | 0~+80°C |
max operating temp. @wetted parts | +400 °C |
temperature coefficient of zero | 0.3%FS/10°C |
temperature coefficient of span | 0.3%FS/10°C |
insulation resistance | 100MΩ@50VDC |
process connection | 1/2"-20UNF-2A or others |
electrical connection | 6 pin male tighten connector or others |
temperature sensor | J type thermocouple or other type on request |
thermocouple connection | 2-pin plug in connector |