Melt flow index testing machine for MFR
1.Melt index tester is used to determine melt-mass flow rate
2.Hi-Q,Reasonable price
Port: Shenzhen
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 50 Set/Sets per Month
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: strong wooden case
Delivery Detail: within 10 days
Melt Flow Index Testing Machine
Specially test covers measurement of the rate of extrusion of molten resins through a die of specified length and diameter under prescribed conditions of temperature, load and position in the barrel for measuring the flow rates of polymer in producing process.
Melt Flow Index Testing Machine is complied with ASTM, ISO, JIS, CNS method A. the specimen can be cut off automatically either by a pre-setting specified time interval or by manually pressing the control key. It is applicable to test the material with a flow rates that fall between 0.15 and 50g/10min, it is acceptable to install method B as your instruction.
Specification:
| Product specification | ASTM-D1238 & D3364, JIS-K7210 |
| Temperature control | Normal~400°C±0.11°C, PID control , indlude overheat protected |
| Poise Weight | 100g, 2160g, 3800g,5000g,7160g, 10000g, 12500g, 21600g (choose one) |
| Cylinder | 9.5504±0.0076mm |
| Pistion | 9.4742±0.0076mm |
| Die | Out 9.5±0.002mm, inside 2.0955±0.0051mm, length: 8.00±0.02mm |
| Auto cutoff device | Auto/manual selection, time interval 0.1~9999min |
Accessories | Mercury thermometer, 150°C, 200°C, 250°C, 300°C (choose one) |
| Brush for clean the die | |
| Brush for clean the cylinder | |
| Speculum | |
| Bakelitefunnel for charging sample | |
| Three steel sheets for cutting off the extruded sample | |
| cylinder gauge | |
| Auto pneumatic loading device | Optional |
| Volume (WxDxH) | 40*51*60cm |
| Weight | 42kg (exclude poise weight) |
| Power | 1 AC220V 3.5A |
Model No.: KJ-1700-1400-1200
Features: 1.sintering & thermal treatment of hard alloy products
2.Intelligent controller
3.non-protective gas operation
4.low price
Model No.: HD-604B
Features: fabric tensile testing equipment
1.can do tensile,peeling force...
2.With big deformation fixture of strength
3.Criteria: AST
Model No.: HD-617-S
Features: fabric elongation testing machine
1.can set the report format at will
2.generate testing strength report
3.servo control stre
Model No.: HD-615-S
Features: metal tensile testing machine
1.For wire tensile testing
2.test report of wire ,cable
3.ASTM D903,CNS-11888
Model No.: CR-10
Features: Chromatic meter
1.Light source:CIE D65 standard light source
2.can connect with portable printer directly
Model No.: CR-10
Features: Minolta chromatic meter
1.Light source:CIE D65 standard light source
2.can connect with printer directly
3.color meter
Model No.: SFY-60
Features: moisture content tester
1rapid detection and intelligentize operation
2.drying specimen quickly and equably
Model No.: HD-501-1000
Features: Box squeezing strength tester
1.For test box ,carton box compressive
2.Strength tester
3.Testing Compresion of carton box
Model No.: HD-219
Features: Wire elongation tester
1.Extended range:0~55%
2.Show precision:0.1%
Model No.: HD-609B-S
Features: multi-function tensile tester
1.Panasonic servo motor instrument
2.can do various tensile test many materials
3.testing repor
Model No.: HZ-1001A
Features: 1.selectable capacity tensile tester for rubber
2.panasonic motor and USA load cell
3.high accuracy
4.3 years warranty
Model No.: GD-2122B
Features: It is suitable to determine water content in the liquid petroleum products by titration using Karl Fischer reagent