Melt flow index testing machine for MFR
1.Melt index tester is used to determine melt-mass flow rate
2.Hi-Q,Reasonable price
Port: Shenzhen
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 50 Set/Sets per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: strong wooden case
Delivery Detail: within 10 days
Melt Flow Index Testing Machine
Specially test covers measurement of the rate of extrusion of molten resins through a die of specified length and diameter under prescribed conditions of temperature, load and position in the barrel for measuring the flow rates of polymer in producing process.
Melt Flow Index Testing Machine is complied with ASTM, ISO, JIS, CNS method A. the specimen can be cut off automatically either by a pre-setting specified time interval or by manually pressing the control key. It is applicable to test the material with a flow rates that fall between 0.15 and 50g/10min, it is acceptable to install method B as your instruction.
Specification:
Product specification | ASTM-D1238 & D3364, JIS-K7210 |
Temperature control | Normal~400°C±0.11°C, PID control , indlude overheat protected |
Poise Weight | 100g, 2160g, 3800g,5000g,7160g, 10000g, 12500g, 21600g (choose one) |
Cylinder | 9.5504±0.0076mm |
Pistion | 9.4742±0.0076mm |
Die | Out 9.5±0.002mm, inside 2.0955±0.0051mm, length: 8.00±0.02mm |
Auto cutoff device | Auto/manual selection, time interval 0.1~9999min |
Accessories | Mercury thermometer, 150°C, 200°C, 250°C, 300°C (choose one) |
Brush for clean the die | |
Brush for clean the cylinder | |
Speculum | |
Bakelitefunnel for charging sample | |
Three steel sheets for cutting off the extruded sample | |
cylinder gauge | |
Auto pneumatic loading device | Optional |
Volume (WxDxH) | 40*51*60cm |
Weight | 42kg (exclude poise weight) |
Power | 1 AC220V 3.5A |