Material Tensile Testing Machine - HT-992

Tensile Testing Machine

Tensile Testing machine equips alternating servomotor for driving crosshead and imported photoelectric encoder for displacement measure. This machine is accompanied with the digital multi-channel closed loop control system, which apply with the latest measurement and control systems with lots of advanced professional and technical development. Control software can automatically finger out routine data, such as tensile modulus of elasticity, extend rate after rupture, non-proportional extend strength RP0.2, etc. It can realize three close loops control and real time display many testing curves of force-displacement, force-time, and stress-strain. These curves automatically switch. Testing process control and data processing conform to the requirements of GB.ISO and so on

Tensile Testing machine has the following performances: Auto zero, auto gear shifting or no subsection, auto indication, auto save, uni-control or multi-step programmed control, auto stop, auto analysis or assistant manual analysis, batch test, testing result statistic, curve select and over load protection. And the machine is beautiful, multifunctional, and operates easily and reliably .

1.This series machines are mainly used for tensile test of various materials such as metal wire, thin plate, rubber, plastic, textile, wire and cable, etc.

2. Double columns structure.

3.Max. testing force:

10KG,20KG,50KG,100KG, (S model )

200KG,500KG, ( M model )

1T,2T,5T,10T,20T,50T (L model)

4.Digital load display: Instantaneous value, peak holding.

5.Test speed display: Instantaneous speed, set speed.

6.It can be equipped with computer data collecting and processing system to measure the

elongation percentage, elastic modular, yield strength. The test curve and result list can be printed out. Test data can be stored. .

7. Range of testing force: 2-100%

8. Accuracy of force: ≤±1% of indicated value

9. Testing speed: 0.0001mm/min -1000 mm/min,

10. Precision of testing force error less than ±1

11. Precision of displacement: 0.001mm

12. Resolution: 1/300000 of max testing force

13. Relative error of displacement: ±0.5%

14. Effective Tension space: 1000mm,Width : 420mm

15. Power supply: 220V±10%, 50Hz

16. Transmission system: Panasonnic AC servo motor,Japan imported speed box, Germany imported ballscrew.

Configuration

1. Imported High precision Load Cell; fulfill ISO7500-1standard

2. Imported servomotor and servo driver;

3. Precise reducer;

4. Precise ball screw shaft;

5. Imported photoelectric encoder;

6. Single chip controller;

7. Computer (Lenovo), LCD display; Key board ,mouse (A set )

8. A4 printer (option)