Manual/Automatic Rotary Turret Vickers Hardness Tester - MVC-1000A1/D1

Function:

Micro hardness of beautiful, and it has good reliability, operability and intuitive.

Built in hardness calculator, can enter the indentation diagonal length, directly

on the LCD screen to display the hardness value.
The machine uses high magnification optical measuring system, an eyepiece

drum readings.

Can measure steel, nonferrous metals, IC thin, thin plastic, foil, coating, surface coating,

laminated metal, heat treatment hardened layer of carbonized layer and the depth and the

hardness gradient.

Main technical parameters:

Hardness scale:
HV0.01, HV0.025, HV0.05, HV0.1, HV0.3, HV0.5, HV1
Display: Hold Time (seconds), Hardness
Test force (gf): 10,25,50,100,200,300,500,1000
Load Control: Automatic (loading / hold / unload)
Test force dwell time (s): 5 ~ 60
Test force selection: external power selection knob, test power in the LCD screen automatically displays the
Objective: 10 ×, 40 ×
Eyepiece magnification: 10 ×
The total magnification (μm): 100 × (observed), 400 × (measurement)
Measurement range (μm): 200
Resolution (μm): 0.25
Measuring range: (5-3000) HV
XY table size test (mm): 100 × 100
Stroke range (mm): 25 × 25
Minimum reading (mm): 0.01
Maximum specimen height (mm): 85 (2.55 ")
Maximum specimen width (mm): 120 (3.35 ") (the center line to the machine from the wall of the pressure head distance)
Output: built-in printer (optional), RS232 serial interface
Power supply voltage: AC110-220V/50HZ