Product Features:
MRIL-P Tool should be considered the first choice for primary formation evaluation in open holes.
Business Terms:
Port: Xingang Port Tianjin or Beijing Airport
Supply Ability: 15 Set/Sets per Year
Contact Supplier
MRIL-P Tool should be considered the first choice for primary formation evaluation in open holes.
Port: Xingang Port Tianjin or Beijing Airport
Supply Ability: 15 Set/Sets per Year
Contact Supplier
The MRIL-Prime tool utilizes the very same principles as medical MRI by directly measuring the magnetic resonance of hydrogen atoms in fluids. Amplitude of the measured signals gives porosity, whereas the actual signature carries information on rock properties and fluid characteristics.
MRIL-Prime Tool Benefits:
The MRIL-Prime tool offers the following benefits:
Accurately measures porosity in mixed lithology
reservoirs
Improves completion success in low-permeability
reservoirs
Identifies pay zones in laminated, fine-grained
sand, and shale formations
Increases access to reserves by providing
complete and accurate analyses of lowresistivity/
low-contrast, intervals
Identifies zones where water-free production can
be established
Multi-frequency capability allows operators to
acquire much more accurate data by averaging
the measurements made in each volume (at each
different frequency)
Only product to allow combining of different
measurements probing different NMR properties
of the fluids and formation, in one single pass a
major step forward in fluid identification and
quantification
Has successfully pioneered the discovery of oil in
zones which triple-combo has traditionally
bypassed, leading to increased production of
reserves and some spectacular discoveries in even
mature production areas
These huge amounts of reservoir information from a
single device are extremely valuable for optimizing
stimulation and completion programs, thereby
optimizing the productivity of each well drilled.
Model No.: DLSB-ZC
Features: Suitable for low-temperature coagulation, shorten distillation time and improve the recovery.
Model No.: DHJF-1205
Features: It can replace dry ice and liquid nitrogen to have low temperature reactions and has high precision of temperature control.
Model No.: CT-2000H
Features: Cold trap can be used as pre-freeze tank and low-temperature trough. Equipped with drain valve for easy drainage.
Model No.: CT-5000H
Features: Cold trap can be used as pre-freeze tank and low-temperature trough. Equipped with drain valve for easy drainage.
Model No.: SY-X1
Features: Provide heat source for all kinds of devices which need to be heated. Can be used alone and also used with Rotary Evaporators.
Model No.: SY-X2
Features: Provide heat source for all kinds of devices which need to be heated. Can be used alone and also used with Rotary Evaporators.
Model No.: SY-2
Features: Provide heat source for all kinds of devices which need to be heated. Can be used alone and also used with Rotary Evaporators.
Model No.: DLSB-G1010
Features: Providing cooling water for complex and narrow systems. Suitable for cooling largescale precious instruments.
Model No.: STCT-4
Features: Digital Display Asphalt Centrifuge Extractor
1.Speed variable between 500 and 3000 rpm
2. Capacity: 1500g
Model No.: STJJJ-6
Features: 2.5 Litres Cement Mixer
1.Cement Paste mixer
2.Revolution: 62-125
3.Rotation: 140-285
4. 2.5 Litres capacity
Model No.: DHJF-4002
Features: It can replace dry ice and liquid nitrogen to have low temperature reactions and has high precision of temperature control.
Model No.: DHJF-4010
Features: It can replace dry ice and liquid nitrogen to have low temperature reactions and has high precision of temperature control.