MYTH-1-7 hydraulic test system for construction machine1.Dimension:295x265x210mm
2.Max pressure:420bar
3.Net Weight :30kg
Port: Qingdao
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 100 Unit/Units per Year
Payment Terms: T/T
Contact Supplier
Packaging Detail: in Box or according to customers' requirements
Delivery Detail: about 15 days
MYTH-1-7 hydraulic test system for construction machine
Connections
Flow block connection by flexible hoses 3-6 feet (1-2 meters)
Adaptors
Adaptor fitting kits and flanges are available to suit the range of flow blocks.
Installation
MYTH series hydraulic tester can be installed at any point in hydraulic pipeline .The hydraulic oil flow from input to output (input) of the hydraulic tester must keep over 30cm from elbows /the links and valves.
Attention: You must open the loading valve when you start the instrument .If the loading valve is closed , it is dangerous.
1) Once the hydraulic tester works ,it could be regulated by loading valve.
2) The cold weather could effect the testing precision ,when the hydraulic oil keeps about 30? The hydraulic tester could work well.
3) Please close the switch after testing.
4) Please open pressure loading valve before testing.
Maintenance :
Loading valve
If the loading could not work , please check whether there is something wrong with valve coil and seal.
Battery
The hydraulic tester is droved by 12v lithium battery ,which can work more than 30h after being charged about 4-8 hours. The battery must be charged by equipped charger.
Flow meter
When it could not show data ,it is possible that turbo rotor is stopped .Please open the turbo temp senor and clean it. If it still could not work ,you should connect with manufacturer.
Accessory
1,1.5m rubber hose:2 pieces
2,1.5m testing pressure line:1 piece
3,Tie-in:2 pieces
4,Multipurpose flange:4 pieces
5,Charger:1 piece
| model | Max flow (LPM) | Max pressure(bar) | Temperature | Precision | Dimension(mm) | Weight(KGS) |
| MYHT-1-2 | 200 | 420 | 150°C | ±1% | 295x265x210 | 6.1 |
| MYHT-1-4 | 400 | 420 | 150°C | ±1% | 295x265x210 | 8.8 |
| MYHT-1-5 | 500 | 420 | 150°C | ±1% | 295x265x210 | 10.2 |
| MYHT-1-7 | 800 | 420 | 150°C | ±1% | 310x285x261 | 14 |
Model No.:
Features: Electronic weighing indicator, digital indicator
platform scale used; Stainless steel structure
Model No.: GDYJ-502
Features: GDYJ-502 Dielectric Breakdown Voltage testing machine for solid insulating materials
Model No.: EM480D
Features: EM480D is the Measurement Tool.
Model No.: DX
Features: 3D measuring meter of the distribution of the magnetic fields
Outer circumference measuring
End side measuring
Inner circum
Model No.: SADT
Features: Ra:0.05um-6.3um/1u"-250u"
Rz:0.2um-50.0um/8u"-999u"
Ry/Rmax:0.2um-25um/8u"-999u"
Resolution:0.01um/1u"
Cut-off:0.8mm/0.30",
Model No.:
Features: The serial of GT glossmeters are designed and manufactured according to international standard
Model No.:
Features: Unique ergonomic design provides direct line-of-sight viewing of display and target
Easy reading 5 digit LCD display
Model No.:
Features: SA50 thickness meter is controlled by micro-processor based on the ultrasonic measuring principle.
Model No.: GD-270A
Features: This testing instrument is applied to test the dropping point of lubricanting grease over 100 degree centigrade.
Model No.: GD-510E
Features: This oil testing instrument is designed to test the solidifying point and cold filter plugging point of petroleum products.
Model No.:
Features: Low Load Vicker s Hardness Tester with Digital Display is a new hi-tech product integrating mechanical and photoelectrical techn
Model No.:
Features: RoughScan is a portable, batterypowered, micro processed instrument for checking surface roughness with digital readout on LCD.