MYTH-1-5 Pump and Motor Tester with Pattent
1. pressure:420bar
2.f low rate:500l/min
3.specification:295x265x210mm
Port: Qingdao
Minimum Order Quantity: 1 Unit/Units according to the customers' request
Supply Ability: 100 Unit/Units per Year meet the customers' needs
Payment Terms: T/T
Contact SupplierPackaging Detail: wooden case
Delivery Detail: about 15 days
MYTH-1-5 Pump and Motor Tester with Pattent
Connections
Flow block connection by flexible hoses 3-6 feet (1-2 meters)
Adaptors
Adaptor fitting kits and flanges are available to suit the range of flow blocks.
Installation
MYTH series hydraulic tester can be installed at any point in hydraulic pipeline .The hydraulic oil flow from input to output (input) of the hydraulic tester must keep over 30cm from elbows /the links and valves.
Attention: You must open the loading valve when you start the instrument .If the loading valve is closed , it is dangerous.
1) Once the hydraulic tester works ,it could be regulated by loading valve.
2) The cold weather could effect the testing precision ,when the hydraulic oil keeps about 30? The hydraulic tester could work well.
3) Please close the switch after testing.
4) Please open pressure loading valve before testing.
Technical Specifications
model | Max flow (LPM) | Max pressure(bar) | Temperature | Precision | Dimension(mm) | Weight(KGS) |
MYHT-1-2 | 200 | 420 | 150°C | ±1% | 295x265x210 | 6.1 |
MYHT-1-4 | 400 | 420 | 150°C | ±1% | 295x265x210 | 8.8 |
MYHT-1-5 | 500 | 420 | 150°C | ±1% | 295x265x210 | 10.2 |
MYHT-1-7 | 800 | 420 | 150°C | ±1% | 310x285x261 | 14 |