MYTH-1-4 easy use hydraulic testers
1.Maximum test flow: 400L/min
2.Maximum test pressure: 420bar
3.Gross Weight:30kg
Port: Qingdao
Minimum Order Quantity: 1 Unit/Units according to the customers' request
Supply Ability: 100 Unit/Units per Year meet the customers' needs
Payment Terms: T/T
Contact SupplierPackaging Detail: wooden case
Delivery Detail: about 15 days
MYTH-1-4 easy use hydraulic testers
Components of instrumentation:
When MYHT - 1 Hydraulic Tester is installed at any position of hydraulic pipe, the hydraulic oil always flows from near the loading valves to the other end. If reverse connect arises, no pressure will be formed. In order to obtain the accurate measurements, the oil inlet and oiloutlet of the tester keep away above30cm away from the elbow, tees, valve.
Note:The loading valve must be unscrew counterclockwise before start-up of the equipment. It will cause human injury or equipment damage if the loading valve is fully closed!!!!!!
Once the tester accessed with oil pipeline, the pressure will be regulated by Loading Valve.
Technical Specifications :
model | Max flow (LPM) | Max pressure(bar) | Temperature | Precision | Dimension(mm) | Weight(KGS) |
MYHT-1-2 | 200 | 420 | 150°C | ±1% | 295x265x210 | 6.1 |
MYHT-1-4 | 400 | 420 | 150°C | ±1% | 295x265x210 | 8.8 |
MYHT-1-5 | 500 | 420 | 150°C | ±1% | 295x265x210 | 10.2 |
MYHT-1-7 | 800 | 420 | 150°C | ±1% | 310x285x261 | 14 |