Electromagnetic Flow meter
1.Integrative or split type
2.High quality and stablity
3.Diameter: DN15-DN2400 or DN15-DN600
Port: Nanjing
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 1000 Set/Sets per Month
Payment Terms: L/C,Western Union
Contact Supplier
MTF Intelligent Electromagnetic Flow meter
MTF electromagnetic flowmeter, composed of sensor and converter, works based on Faraday's law of
electromagnetic induction. It is used to measure electricalconductivity of liquid or solid. Generally, the electrical
conductivity should be over 5uS/cm (electrical conductivity of tap water, raw water is about 100-500uS/cm. It can also be used to measure various mediums like acid, alkali, saline solution, paper pulp, ore pulp
and so on, but these mediums can't contain a lot of magnetic materials and bubbles.
Technical Parameters
MTF Electromagnetic Flowmeter | Divided type/ Integrated type | Integrated type with explosion proof |
Basic Error | ±0.2% or ±0.5% of indicated value | |
Diameter(mm) | DN15-DN2400 | DN15-DN600 |
Explosive-Proof Level | ________ | ExdmibllCT6 |
Flange | Accord withGB119 standard Carbon steel (Stainless steel is optional) | |
Pressure Level | DN15-DN600 1.0,1.6,2.5,4.0MPa | DN15-DN600 1.0,1.6,2.5,4.0MPa DN3-DN600 1.0,1.6,2.5,4.0MPa |
DN700-DN2400 0.6MPa | ||
Please consult with us if you order special pressure | ||
Lining Materials | PTFE, PU,CR, PFA, F46, IR | |
Conductivity | ≥5μS/cm(Please consulate with us if less than 5μS/cm) | |
Electrode | 316L, Hastelloy, Ti, Ta, Pt- Ir | |
Protection Level | IP67 (for sensor, IP68 is optional) | IP67 |
Medium Temperature | -25°C-140°C (please refer to the choice of lining material) | -25°C-80°C (please refer to the choice of lining material) |
Ambient Temperature | -25°C-60°C | |
Influence of Ambient Temperature | <±0.1%/ 10°C or <±0.25%/ 10°C | |
Repetition | ≤±0.1% or ±0.25% | |
Analog Output Error | ≤±0.02mA | |
Measurement Range of Velocity | ≤20m/s | |
Depth of Cover | <5m (only for IP68) | ________ |
Sensor Cable | <100m (please consult with us if you need longer) | ________ |
Electric Connections | M20×1.5 seal, G1/2, NPT1/2 | |
Output Interface | Standard output (4-20mA), Dual current output, HART, Proflbus-PA |