MOTECH LCR Meter(MT4090)
200KHz,Dual LCD Display with LED backlight
DMM Functionalities
Open / Short calibration
Port: Shenzhen
Minimum Order Quantity: 1 Set/Sets The more the cheaper!
Supply Ability: 150 Set/Sets per Month
Payment Terms: T/T,Western Union,MoneyGram,PayPal
Contact Supplier
Packaging Detail: 400*280*220mm,7.8kg/set,carton box
Delivery Detail: Less than 15 days!
200KHz LCR METER (MT 4090)
Features:
•Measurement Parameters : Z , Ls , Lp , Cs , Cp , DCR , ESR , D , Q , and q.
•Test conditions : 100MHz , 120Hz , 1KHz , 10KHz , 100KHz , 200KHz ; 1Vrms, 250mVrms, 50mVrms, 1Vdc (DCR only)
•DMM Functionalities
•Dual LCD Display with LED backlight
•Open / Short calibration
•Remote binning capability
•Auto range / range hold selection
Specifications
Test Condition : | |
| Frequency | 100Hz / 120 Hz / 1KHz / 10KHz / 100KHz / 200KHz |
| Level | 1Vrms / 250m Vrms / 50m Vrms / 1Vdc (DCR only) |
| Measurement Parameters | Z, Ls, Lp, Cs, Cp, DCR, ESR, D, Q and q |
| Basic Accuracy | 0.1 % |
Dual Liquid Crystal Display with LED backlit | |
Primary Parameters Display : | |
| Z | AC Impedance |
| DCR | DC Resistance |
| Ls | Serial Inductance |
| Lp | Parallel Inductance |
| Cs | Serial Capacitance |
| Cp | Parallel Capacitance |
Secondary Parameters Display | |
| q | Angle Impedance |
| ESR | Equivalent Series Resistance |
| D | Dissipation Factor |
| Q | Quality Factor |
Combinations of Display | |
| Serial Mode | Z-q, Cs-D, Cs-Q, Cs-ESR, Ls-D, Ls-Q, Ls-ESR |
| Parallel Mode | Cp-D, Cp-Q, Lp-D, Lp-Q |
DMM Functionalities | |
DCV, ACV, DCA, ACA, Diode/Continuity Check | |
Measurement Range
| Parameters | Range |
| Z | 0.000 W to 500.0 MW |
| L | 0.030mH to 9999.0 H |
| C | 0.003 pF to 80.00 mF |
| DCR | 0.000 W to 500.0 MW |
| ESR | 0.000 W to 9999 W |
| D | 0.000 to 9999 |
| Q | 0.000 to 9999 |
| q | -180.0° to 180.0° |
| V | 0.000mV to ± 600.0V |
| I | 0.000mA to ± 2.000A |
DC Voltage Measurement | |
| Range Resolution Accuracy Input Impedance | 2V, 20V, 200V, and 600V 1mV, 10mV, 100mV,1V ± (0.4% + 3Digit) 1MW |
AC Voltage Measurement (True RMS) | |
| Range Resolution Accuracy Input Impedance | 2V, 20V, 200V and 600V 1mV, 10mV, 100mV, 1V ± (0.8% + 5Digit) @ 40Hz ~ 1KHz |
DC Current Measurement | |
| Range Resolution Accuracy Current Shun | 2A, 0.2A, 20mA and 2mA 1mA, 0.1mA, 0.01mA and 1µA ± (0.4% + 3Digit) 0.1W @ current > 20mA 10W @ current <_ 20mA |
AC Current Measurement (True RMS) | |
| Range Resolution Accuracy Current Shun | 2A, 0.2A, 20mA and 2mA 1mA, 0.1mA, 0.01mA and 1µA ± (0.8% + 5Digit) @ 40Hz ~ 1KHz 0.1W @ current > 20mA 10W @ current <_ 20mA |
Continuity Check | |
| Continuity Threshold Continuity Indicator Input Protection | 50W ( Approximately ) Tone Buzzer 600V ( max ) |
Diode Test | |
| Test Current Open Circuit voltage Input protection | : 2.5mA ( Typical ) : 5.0VDC ( nominal ) : 600V ( max ) |
General
| Temperature | 0 to 40°C ( Operating ) -20 to 70°C ( Storage ) |
| Relative Humidity | Up to 85% |
| AC Power | 110V / 220V ± 10%, 60/50 Hz |
| Dimensions | 300mm x 220mm x 150mm (D x W x H) |
| Weight | 6.5 kgs |
Model No.: 3100A
Features: 1.Measurement Range: 100M
2.Laser Class: Class 2M
3.Laser Class Class 2M
Model No.: ST-01
Features: Fast Car Paint Checker
Range check(um): 0~150, 150~200, 200~350, 350~500, 500~1000, 1000~1200
Model No.: TSI 003A
Features: 1.Usage:Tensile Tester
2.Application:can conduct tensile, compression, pilling, pearing
3.test textile,iron,plastic,shoes
Model No.: test machine
Features: hydraulic press machine is used for hydrostatic testing of pipes and checking if there is leekage defect in the pipes.
Model No.: Q8/UV2
Features: Uv weathering test chamber
1.Q-Lab lamp
2 . Condensation and Water spray
3. 340nm-400nm
Model No.: styjg-500
Features: Manhole Cover Compression Testing Machine
1. Capacity: 500KN
2. Precision: 1%
3. Bearing plates size: (dia)995mm, 800mmx80
Model No.: MST-3530
Features: It is a handheld and integrated tester which supports
XDSL,
EPON,
WLAN
and Ethernet service.
Model No.: COM-EMC
Features: diesel fuel injection pump test bench
1.computer display
2.test RPM, count, temperature, pressure, advance angle
Model No.: DRX-I-PB/PC
Features: 1.Thermal conductivity of plastic, glass, fiber, foam;
2.Guarded Heat Plate Apparatus
Model No.: III
Features: the integration of workstation type test bench(TLD-III)
1.easy to operate
2.high technology
3.test accurate
Model No.: 3901
Features: to proceed reasonable resolution of vector towards to the balance mass which be worked out, to meet the field installation
Model No.: YYQ-160A
Features: balancing machine
1)19 inch color LCD monitor
2)industrial control computer,high accurate
3)windows system