MOTECH LCR Meter(MT4090)
200KHz,Dual LCD Display with LED backlight
DMM Functionalities
Open / Short calibration
Port: Shenzhen
Minimum Order Quantity: 1 Set/Sets The more the cheaper!
Supply Ability: 150 Piece/Pieces per Month
Payment Terms: T/T,Western Union,MoneyGram,PayPal
Contact SupplierPackaging Detail: 400*280*220mm,7.8kg/set,carton box
Delivery Detail: Less than 15 days!
200KHz LCR METER (MT 4090)
Features:
•Measurement Parameters : Z , Ls , Lp , Cs , Cp , DCR , ESR , D , Q , and q.
•Test conditions : 100MHz , 120Hz , 1KHz , 10KHz , 100KHz , 200KHz ; 1Vrms, 250mVrms, 50mVrms, 1Vdc (DCR only)
•DMM Functionalities
•Dual LCD Display with LED backlight
•Open / Short calibration
•Remote binning capability
•Auto range / range hold selection
Specifications
Test Condition : | |
Frequency | 100Hz / 120 Hz / 1KHz / 10KHz / 100KHz / 200KHz |
Level | 1Vrms / 250m Vrms / 50m Vrms / 1Vdc (DCR only) |
Measurement Parameters | Z, Ls, Lp, Cs, Cp, DCR, ESR, D, Q and q |
Basic Accuracy | 0.1 % |
Dual Liquid Crystal Display with LED backlit | |
Primary Parameters Display : | |
Z | AC Impedance |
DCR | DC Resistance |
Ls | Serial Inductance |
Lp | Parallel Inductance |
Cs | Serial Capacitance |
Cp | Parallel Capacitance |
Secondary Parameters Display | |
q | Angle Impedance |
ESR | Equivalent Series Resistance |
D | Dissipation Factor |
Q | Quality Factor |
Combinations of Display | |
Serial Mode | Z-q, Cs-D, Cs-Q, Cs-ESR, Ls-D, Ls-Q, Ls-ESR |
Parallel Mode | Cp-D, Cp-Q, Lp-D, Lp-Q |
DMM Functionalities | |
DCV, ACV, DCA, ACA, Diode/Continuity Check |
Measurement Range
Parameters | Range |
Z | 0.000 W to 500.0 MW |
L | 0.030mH to 9999.0 H |
C | 0.003 pF to 80.00 mF |
DCR | 0.000 W to 500.0 MW |
ESR | 0.000 W to 9999 W |
D | 0.000 to 9999 |
Q | 0.000 to 9999 |
q | -180.0° to 180.0° |
V | 0.000mV to ± 600.0V |
I | 0.000mA to ± 2.000A |
DC Voltage Measurement | |
Range Resolution Accuracy Input Impedance | 2V, 20V, 200V, and 600V 1mV, 10mV, 100mV,1V ± (0.4% + 3Digit) 1MW |
AC Voltage Measurement (True RMS) | |
Range Resolution Accuracy Input Impedance | 2V, 20V, 200V and 600V 1mV, 10mV, 100mV, 1V ± (0.8% + 5Digit) @ 40Hz ~ 1KHz |
DC Current Measurement | |
Range Resolution Accuracy Current Shun | 2A, 0.2A, 20mA and 2mA 1mA, 0.1mA, 0.01mA and 1µA ± (0.4% + 3Digit) 0.1W @ current > 20mA 10W @ current <_ 20mA |
AC Current Measurement (True RMS) | |
Range Resolution Accuracy Current Shun | 2A, 0.2A, 20mA and 2mA 1mA, 0.1mA, 0.01mA and 1µA ± (0.8% + 5Digit) @ 40Hz ~ 1KHz 0.1W @ current > 20mA 10W @ current <_ 20mA |
Continuity Check | |
Continuity Threshold Continuity Indicator Input Protection | 50W ( Approximately ) Tone Buzzer 600V ( max ) |
Diode Test | |
Test Current Open Circuit voltage Input protection | : 2.5mA ( Typical ) : 5.0VDC ( nominal ) : 600V ( max ) |
General
Temperature | 0 to 40°C ( Operating ) -20 to 70°C ( Storage ) |
Relative Humidity | Up to 85% |
AC Power | 110V / 220V ± 10%, 60/50 Hz |
Dimensions | 300mm x 220mm x 150mm (D x W x H) |
Weight | 6.5 kgs |