1. Oil-proof, water-proof, dust-proof
2. Knobe make operation easily
3. Colorful B scan function
4. 10 hours working time
Port: Beijing
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 100 Unit/Units per Week
Payment Terms: T/T,Western Union
Contact SupplierPackaging Detail: Normal exporting packing
Delivery Detail: 3 working days
The MFD800C is an advanced digital ultrasonic flaw detector featuring a multi-color TFT LCD and a host of new features to meet challenging inspection requirements. It combines powerful flaw detection and measurement capabilities, extensive data storage, and the ability to transfer detailed inspection data to the PC via its high-speed USB port.
The instrument incorporates many advanced signal processing features including a 15MHz RF bandwidth to permit testing of thin materials, narrowband filters to improve signal to noise in high gain applications, a spike pulser for applications requiring higher frequencies, and a tunable square wave pulser to optimize penetration on thick or highly attenuating materials.
The instrument can be widely used in locating and sizing hidden cracks, voids, disbands, and similar discontinuities in welds, forgings, billets, axles, shafts, tanks and pressure vessels, turbines, and structural components.
Specifications
Range: 0 to 9999 mm, at steel velocity
Material Velocity: 1000 to 9999m/s
Display Delay: -20 to 3400 µs
Probe Delay/Zero Offset : 0 to 99.99µs
Sensitivity: 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB and locked.
Test Modes: Pulse echo, dual element and thru-transmission
Pulser: Tunable Square Wave Pulser
Pulse Repetition Frequency ranges from 10 Hz to 1000 Hz
Pulse Energy: 200V, 300V, 400V, 500V, 600V selectable
Bandwidth (amplifier bandpass ): 0.2 to 20 MHz
Gate Monitors: Two independent gates controllable over entire sweep range
Rectification: Positive half wave, negative half wave, full wave, RF
System Linearity: Horizontal: +/-0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy +/-1 dB.
Reject (suppression): 0 to 80% full screen height
Units: Inch or millimeter
Transducer Connections: BNC or LEMO
Power Requirements: AC Mains 100-240 VAC, 50-60 Hz
Operating Temperature: -10°C to 50°C
Storage Temperature: -30°C to 50°C
No. | Item | Qty. |
1 | Portable Ultrasonic Flaw Detector with multi-color TFT LCD Display | 1 |
2 | Straight Beam Transducer (4 MHz, Φ10) | 1 |
3 | Angle Beam Transducer (4 MHz, 8 mm×9 mm, 60°) | 1 |
4 | Interconnect Cable for the transducer (Q9-C5,or optional C9- C5) | 1 |
5 | Rechargeable Li-Ion Battery Package, 8.8 amp hour | 1 |
6 | Power supply/charger unit | 1 |
7 | Handle | 1 |
8 | Operating Manual in English | 1 |
9 | Datapro Software | 1 |
10 | USB Cable (Model: MUSB01) | 1 |
Cross keypads can help you operate equipment easily by one hand.
Colorful B scan function can help you see crack/air bubble/impurity clearly on the screen.
Test range can reach to 9999mm.
Large volume battery can make equipment work about 10 hours.
Weld Figure feature can help you find flaw in welding stream directly when you use angle transducer to detect.
USB interface can connect with the computer. Power interface can recharge the battery.
Rotary knob can help you adjust the data quickly.
You can place the equipment as you like with the swiveling support handle.
The standard accessories.
Gost Certificate
ISO Quality Certificate
Difference Among Mitech Ultrasoinc Flaw Detector