MITECH LX-C Shore Hardness Tester - LX-C

1. Easy to use and carry, 2. Efficiant and accurate measurement, 3. Pointer display, esay to read, 4. vulcanized rubber and pla - more info check here: http://www.buymeasuringtools.com/MITECH-LX-C-Shore-Hardness-Tester-10164726/

Quick Brief

Place of Origin: Beijing China (Mainland) Brand Name: Mitech Model Number: LX-C Model: LX-C Calibration Value: 0-100HC Resolution: 1HC Pressure Head Size: R2.5mm Apparatus Weight: 0.3kg

Product Features:

1. Easy to use and carry

2. Efficiant and accurate measurement

3. Pointer display, esay to read

4. vulcanized rubber and pla

Business Terms:

Minimum Order Quantity: 1 Set/Sets

Supply Ability: 50 Set/Sets per Week

Payment Terms: T/T,Western Union

Contact Supplier

Specifications and Product Details:

LX Shore hardness tester Manual

Type C: applicable to the hardness test of rubber microporous material.

I. Major performances
Shore hardness gauge is an instrument to measure vulcanized rubber and plastic products.. This instrument has three models of Type A, Type C and Type D, and each model is subdivided into two types of single pointer and double pointer..
Type C applies to the testing of microporous material which is used to make shoes, with compression rate 50 percent, stress 0.049 MPa or above, and this kind of material is made of rubber plastic and has blister in plastic.

This hardness gauge conforms to the regulations of GB/T531-99, GB2411-80, hg/t2489-93, JJG304-2003.

II.Main technical parameters

	Type A	Type C	Type D
Calibration Value	0-100HA	0-100HC	0-100HD
Resolution	1HA	1HC	1HD
Pressure Head Size	Φ1.25mm	R2.5mm	Φ1.25mm
End pressure of Pressure Head	0.55N-8.06N	0.55N-8.06N	0-44.5N
Pressure Needle Range	0-2.5mm
Apparatus Weight	0.3kg

III.Using methods

When using single pointer models, one should place the sample in the solid plane, hold the hardness gauge, keep the pressure needle at a distance of at least 12 mm from the edge of the sample, smooth enough pressure in the pressure on the sample, and smoothly press on the sample to a full extent. One should press the pressure needle vertically to the sample, and until pressed to a full extent and contact the sample completely, then read the calibration value within one second.

At measuring points which are at least 6 mm away from each other, measure hardness values for five times, and calculate the average value(for microporous material, the distance between the measuring points should be at least 15 mm). In order to keep the stability of conditions and improve the accuracy of determination, one should install the hardness gauge on the same type of the measuring shelf from a complete production network. When using double pointer models to do measurement, one should rotate the supporting pointer to the wax, etc.