Ethylene-propylene Rubber Density Tester can satisfy testing solid and liquid materials.
Port: Taichung
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 2000 Set/Sets per Year
Payment Terms: T/T
Contact SupplierPackaging Detail: 1 set per packing40*38*34cm
Delivery Detail: 3 days after receiving full payment
Ethylene-propylene Rubber Density Tester
Specifications:
Model | MH-300S |
Measuring Range | 0.01g-300g |
Testing time | About 5 seconds |
Density Precision | 0.001 g/cm3 |
Value Showed | Density, Volume |
Temperature compensation | The solution temperature can be set from 0°C to 49°C |
Solution Compensation | The solution density can be set to 19.999 |
Mixture density | Can set the mixture ratio of two mixtures |
Setting | Can set the density of different mixtures |
Functions:
1. It has the function of showing mixture proportion; it is suitable for researching and developing new materials.
2. It has the function of HI limit and LO limit, can judge whether the density of the sample is appropriate or not, and it is equipped with buzzer.
3. The measuring is fast, only two measuring steps, the density and volume can be showed immediately.
4. It has the RS-232C interface, can be connected to the PC and the printer easily.
5. It adopts design of big tank, this can decrease the inaccuracy caused by supporting wire’s buoyancy.
6. It has the liquid mode, and the optional equipment can be chosen. It can satisfy the testing of solid and liquid.