(MH-2000L) Electronic Solid Densimeter - MH-2000L

Electronic Solid Densimeter

Suitable for:

Rubber, Plastic, Hard alloy, Powder metallurgy industry, Casting parts, Aluminum foundries, precious metals recycling industry and so on.

Functions:

1. There is relative relationship between products’ density and the compression strength or tensile strength. Large-size parts can not be partition tested, under partition testing, the cut surface will influence the density testing result incorrect.

2. The testing method of MH-2000L is not as the same as hanging testing method, it is designed by using large-scale density testing platform, it is suitable for testing large-size materials and The internal size of water tank is 22*18*14 cm.

3. The maximum weight can reach 2100g, density precision is 0.001g/cm3.

4. By testing density, the changing of certain materials composition or the flaw of product can be indicated, such as crack or bubbles.

5. In aluminum foundries, the melt quality is monitored by taking two samples: one is under air pressure and the other is under the pressure of 80 mbar, once they have been set and cooled, the density of the samples is determined. The ratio of both density values is the important foundation for providing melt purity.