Glossmeter
1.ASTM D 523,ASTM D2457,etc.
2.Portable glossmeter
3.Glossmeter has been designed mainly with the user in mind
Port: BY NEGOTIATION
Minimum Order Quantity: 1 Set/Sets BY NEGOTIATION
Supply Ability: 100 Set/Sets per Year 10/M
Payment Terms: L/C,T/T,BY NEGOTIATION
Contact SupplierPackaging Detail: WOODEN PACKAGING
Delivery Detail: 30D MAX
MODEL NO.
MG268 -F2
Application:
The MG268- F2 glossmeter has been designed mainly with the user in mind. It can offer greater versatility and ease of use, the instrument have far superior data handling capabilities.
With three angles in one robust, lightweight, portable package the MG- 268 will easily tackle most gloss measurement applications.
Related Standards:
STANDARDS | ASTM D 523 ASTM D2457 | DIN EN ISO 2813 DIN 67530 | EN ISO 7668 | JIS Z 8741 |
Note: this gloss meter can conform to but not limit to all the standards above, for more standards conformance, please contact us.
Key Specification:
*Reading range: 0~199.9~2000 GU
*Deviation: ±1.5; ±1.5% GU
* Measuring area: 9×10; 9×16; 5×39 mm2
*Incidence angle: 20/60/85 Deg.
*Dimensions: 155×48×75mm
* Weight: 400g
*Power:single battery
*20° for high gloss surface
*60° for medium gloss surface
*85° for low gloss or matt surface
The 60°geometry is widely used due to its medium gloss coverage. However, it has been experimentally shown that when readings taken at 60°exceed 70 GU, then a change to 20°is recommended for better differentiation. Equally when readings drop below 10 GU the geometry should be changed to 85°for the same reason.
Glossmeter