Low Temperature Brittleness Tester
1,use in rubber indstry
2.temperature range -60~0C
3.France compressor
4.3 years warrant
Port: Yantian
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 500 Set/Sets per Month
Payment Terms: L/C,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: in wooden case
Delivery Detail: within 30 working days after get 30% downpayment
Low Temperature Brittleness Tester for rubber
HZ-7004 single-specimen rubber low temperature Brittleness Tester measures the highest temperature which vulcanized rubber is impacted to damage under special condition, that temperature is the brittle temperature. You can compare with different non-rigid plastic and other flexible materials at low temperature under the conditions of identification. It can measure material performance of the pros and cons for different rubber materials or the formulations of vulcanized rubber under brittle temperature and low temperature. Therefore, it is indispensable for research materials and products quality inspection, production process control, etc..
corresponding standard
The instrument is based on the national standard GB1682-82 design, the technical indicators in line with national standards.
Applicable Industry: Rubber Industry
Technical parameter
Model | HZ-7004 |
Test temperature | -60°C--0°C |
Impact speed | 2m/s ±0.2m/s |
temperature fluctuation | <±0.5°C |
distance between the center of impactor to the bottom of gripper | 11±0.5mm |
Outside size | 720mm×700mm×1380mm |
Power | 1100W |
Cold well volume | 700ml |